How to remove R160 Male Stubs

Get the most out of your Engine / Gearbox with these handy hints ...
Post Reply
User avatar
H-top
Junior Member
Posts: 782
Joined: Thu May 22, 2008 4:27 pm
Location: Brisbane

Post by H-top » Sat Feb 05, 2011 12:03 pm

ill get pics up during the week mate :D
H-Top

rolling in

MY00 GT Foz - Auto, Turbo, Luxury

Image
Top
User avatar
legacytt
Junior Member
Posts: 215
Joined: Thu Oct 06, 2005 10:00 am
Location: Launceston,Tas

Diff Stubs

Post by legacytt » Mon Feb 07, 2011 7:06 pm

A someone else has allready said, you must have a diff with internal circlips. Put the spring pin back in the hole in the stub and use a claw hammer to sharply pry the stub outwards using the pin for leverage against the side of the diff. The Stub will pop out allowing you to then remove the diff centre.
Gen 1 Legacy GT 3inch lift and 28's
Top
User avatar
H-top
Junior Member
Posts: 782
Joined: Thu May 22, 2008 4:27 pm
Location: Brisbane

Post by H-top » Wed Feb 16, 2011 6:07 pm

Cheers all,

Ive got the stubs and center out now, used a prybar and a block of timber.

Cheers,
S
H-Top

rolling in

MY00 GT Foz - Auto, Turbo, Luxury

Image
Top
Post Reply

Return to “Engine, Gearbox and Diff”