new addition plus the already resident
The stay rod bracket is on the gearbox on EJs. Some EA boxes had a bracket that you can use, or an EJ one might fit. A-Part wreckers in Malaga had several gearboxes sitting on the shelf with the necessary brackets last time I was there.
Dane.
Dane.
[SIGPIC][/SIGPIC]
1993 EA82/EJ18/EJ22/EJ22/EJ20/EJ22 L Series perpetual project
1993 EA82/EJ18/EJ22/EJ22/EJ20/EJ22 L Series perpetual project
- red_rocket
- Junior Member
- Posts: 233
- Joined: Mon May 22, 2006 10:00 am
- Location: perth, wa
I have done something on mine. Not sure what but used a std bracket, and i had to cut and reweld the tension link. Works great:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon

Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Here's that wiring diagram I mentioned to you Scottred_rocket wrote:guys
was having trouble with my car not starting and figured out it was the starter motor so had to keep on wacking it on the occasion it wouldnt kick over.
So finally got around to changing it last night and today it did it again. Only the once so far but its pretty inconvenient xometimes. Is this common with ej conversions? Or maybe because of the adapter plate has pushed it further back?
Also anyone have the engine stay rod bracket off the ej engine?
Cheers for the help


You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- red_rocket
- Junior Member
- Posts: 233
- Joined: Mon May 22, 2006 10:00 am
- Location: perth, wa
- red_rocket
- Junior Member
- Posts: 233
- Joined: Mon May 22, 2006 10:00 am
- Location: perth, wa
what do you guys think of 15" mags off a vortex? i dont know for sure if they actually ever came out with the vortex though. I know a guy who has them lying around and they dont have quite the same appeal as the sunraysia's but give me more tyre options and are 4 stud so no stuffing around.
was thinking of spraying them matte black or something so they dont look as gay. i dont have a pic but will try and get something up.
its Pauls' friend so maybe paul might have or know where to get a pic from???
was thinking of spraying them matte black or something so they dont look as gay. i dont have a pic but will try and get something up.
its Pauls' friend so maybe paul might have or know where to get a pic from???
they might come from a peugeot. the old 505 i think had 15"
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon

Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Nope.. they are Subaru rally rims.. same as Possum used on his RX Leone 
http://upload.wikimedia.org/wikipedia/e ... i_1986.jpg

http://upload.wikimedia.org/wikipedia/e ... i_1986.jpg
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
I can get a better shot for ya.. I'd say they'd look better as they are but just cleaned upred_rocket wrote:what do you guys think of 15" mags off a vortex? i dont know for sure if they actually ever came out with the vortex though. I know a guy who has them lying around and they dont have quite the same appeal as the sunraysia's but give me more tyre options and are 4 stud so no stuffing around.
was thinking of spraying them matte black or something so they dont look as gay. i dont have a pic but will try and get something up.
its Pauls' friend so maybe paul might have or know where to get a pic from???

You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- red_rocket
- Junior Member
- Posts: 233
- Joined: Mon May 22, 2006 10:00 am
- Location: perth, wa
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Here you go Scott.. I'd use them on an L.Series (I would but I brought the crossbred kit) They are great because they are rare 



You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
EDIT: replace rare with gay.RSR 555 wrote:Here you go Scott.. I'd use them on an L.Series (I would but I brought the crossbred kit) They are great because they are rare
go for practicality tho i spose.
alex
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.
previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.
previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
Hey Alex.. have you ever looked at how many times you have used the word "gay"Keffa wrote:EDIT: replace rare with gay.
go for practicality tho i spose.
alex


You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- red_rocket
- Junior Member
- Posts: 233
- Joined: Mon May 22, 2006 10:00 am
- Location: perth, wa
coming from the guy who had chromies on his L series.....(from memory not 100% sure, hehe)Keffa wrote:EDIT: replace rare with gay.
go for practicality tho i spose.
alex
but you are right they arent the best looking out, maybe a spray of black would make them look half normal.
Paul, with my 4" lift and those tyres that are on there or similar AT's, how much guard word would i be doing do you think???
oh and thanks for the pic, waiting to see how much Jarred wants to flog them off for, if cheap then i may
- red_rocket
- Junior Member
- Posts: 233
- Joined: Mon May 22, 2006 10:00 am
- Location: perth, wa
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
No good at photochop-shop but maybe someone else could help?
As for the rims on your car.. I'm guessing that because they are on the unlifted Vortex then you will have no issues on your L.. Tyres would be a test and see kinda thing.. do you know your tyre shop really well?
As for the rims on your car.. I'm guessing that because they are on the unlifted Vortex then you will have no issues on your L.. Tyres would be a test and see kinda thing.. do you know your tyre shop really well?
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- red_rocket
- Junior Member
- Posts: 233
- Joined: Mon May 22, 2006 10:00 am
- Location: perth, wa
i dont know them that well. have been there a couple of times but dont really like them that much. although never really liked tyres shops a hell of a lot.
do you have any suggestions of decent places???
maybe the vortex has bigger wheel arch's? because they look fairly standard on JArred's vortex as if it came out with those rims.
can get them for cheap so might do that and see if i can get them painted before the weekend
oh and Jarred's wife wanted to ask me to ask you Paul if you knew if Jarred's hoist was easy to use(like yours) as i will grab the rims tomorrow. so either i can take them off or even if you were in the area you could maybe loosen them off for me til i get there in the arvo??
cheers
do you have any suggestions of decent places???
maybe the vortex has bigger wheel arch's? because they look fairly standard on JArred's vortex as if it came out with those rims.
can get them for cheap so might do that and see if i can get them painted before the weekend

oh and Jarred's wife wanted to ask me to ask you Paul if you knew if Jarred's hoist was easy to use(like yours) as i will grab the rims tomorrow. so either i can take them off or even if you were in the area you could maybe loosen them off for me til i get there in the arvo??
cheers
- RSR 555
- Elder Member
- Posts: 6951
- Joined: Sat Nov 10, 2007 10:42 am
- Location: ATM... stuck in Rockingham
I don't think the wheel arches are bigger but if they are it would be just a little. I can operate his hoist and also I can help you take the wheels off.. Just give me a ring before you head over there 

You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]
Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
- red_rocket
- Junior Member
- Posts: 233
- Joined: Mon May 22, 2006 10:00 am
- Location: perth, wa
mate, if it is a good tyre place that you are looking for, let me know when you are rerady for tyres and ill sort something out. i know the two guys that own kewdale tyres.
Cheers Mike.
Cheers Mike.
nuthin beats a subbi
Previous rides: 1998 rx liberty sedan, 2007 mitsu 380 and now a 2005 foz, lifted with bigger and black wheels ( Got rolled
) and now a 100 series land cruiser.
Previous rides: 1998 rx liberty sedan, 2007 mitsu 380 and now a 2005 foz, lifted with bigger and black wheels ( Got rolled
