92 brumby driver side doors?
- Creamfeeder
- Junior Member
- Posts: 31
- Joined: Tue Aug 19, 2008 5:29 pm
- Location: Inner Sydney NSW
92 brumby driver side doors?
Hi, anybody know the relative availability of 92 brumby drivers side doors? My car has been sitting idle for quite a while now and some hitherto supposedly dealt with rust has started to eat through. looking at the possibility of replacing the door over just cutting it out and bogging it up. Anybody have any other suggestions, as I know that finding the right door with colour, decals and things could prove difficult/expensive/ugly...
You may have better success finding a EA81 coupe door as they are interchangable (not the glass though), though you won't find the same colour. I've been looking for some time for a pair of straight doors without success but there are certainly a few coupes around at wreckers that might be acceptable.
Dean.
Dean.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
- TOONGA
- Elder Member
- Posts: 5339
- Joined: Sat May 30, 2009 10:15 am
- Location: Mandurah where they divided by zero
- Contact:
http://cgi.ebay.com.au/Subaru-Brumby-fr ... 286.c0.m14
sadly ending today but they look to be in good nick
TOONGA
sadly ending today but they look to be in good nick
TOONGA
- Creamfeeder
- Junior Member
- Posts: 31
- Joined: Tue Aug 19, 2008 5:29 pm
- Location: Inner Sydney NSW