1991 Liberty Series 1 or 2 ?

caboolture · Post by **caboolture** » Thu Oct 30, 2008 5:01 pm

Trying to work out what my 9 month 1991 Liberty GX awd Wagon is.
Is it a series 1 or 2 ? does have a gen 1 or 2 tag and will original gen 2 1996 outback rear struts/coil bolt straight on. It has a 3 '' lift.

BrennyV · Post by **BrennyV** » Thu Oct 30, 2008 5:07 pm

from your sigpic it would appear to be a gen1 s2

Bumpty · Post by **Bumpty** » Thu Oct 30, 2008 6:46 pm

Check out this thread mate > http://ozliberty.com/forums/showthread.php?t=11939

I think you should put a thread up in the 'my ride' section, would like to see more shots of the lib

(may help us tell you what you have

)

Also, if it is a s2... Yes gen2 (96 - [beginning of 98]) outback struts will swap straight in, rear and front.

RetroLover · Post by **RetroLover** » Thu Oct 30, 2008 6:51 pm

WTF. Ive got a 91 Liberty, but its a gen1 ser1. Interesting, so both gen1 ser1 and 2 where sold during the same year, didnt know that.

Subafury · Post by **Subafury** » Thu Oct 30, 2008 10:30 pm

looks like a s2. 91 was the crossover year- the later ones obviously s2. easiest way i reckon is check the headlight- if the inner edge is dead straight- series 2, if slightly rounded- s1.

chubby37 · Post by **chubby37** » Sat Nov 01, 2008 12:29 pm

the car you have is a gen 1 series 2 for sure....the outback front struts will fit it the front but the backs wont as the springs are tapered...you will need to go to a shocky place and get some to fit...fulcrum do them.....or the other option is put in 2 or 3 inch stut tops and give it a suspension lift that way...not to sure is you could put your springs and tops on the outback rear to fit?

SUBYDAZZ · Post by **SUBYDAZZ** » Sat Sep 26, 2009 9:03 am

Every Subaru model year starts the year before, although it appears to change which month it starts with each model.