Snorkels for Brumby

Pommiebrat · Post by **Pommiebrat** » Sat Sep 06, 2008 7:56 am

Well the rear diff is all done and I'm about to fit the engine. I have a Weber carb and have modified a standard Brumby air-box to fit it so I can keep the K&N filter. This version of the brumby (its a late '91) has a plastic continuation pipe that goes across the engine bay from the end of the usual air-box and tucks up inside the right wing. I want to fit a snorkel to this. I could fabricate something out of pipe etc but want to get a good finish especially where the snorkel goes through the wing so am thinking adapting a Safari snorkel or similar from another type of vehicle might be better. Has anyone done this or got any pictures of how they've fitted a snorkel?

Cheers,

John

rtcb65 · Post by **rtcb65** » Sat Sep 06, 2008 8:08 am

Try this link. It is from a member on this forum. I cant remember which vehicle it come from. Maybe a forerunner .Easy way is , go to get one and try on brumby and see how it fits body line before purchase.

http://rides.webshots.com/album/555057146owdsAW

Phizinza · Post by **Phizinza** » Sat Sep 06, 2008 11:04 am

2" steel tube, no bends just cut and welded. This is what my mate knocked up for his. Took a couple of hours. He used a weber, 90mm elbow down pipe bit, flex tube from a industrial vacuum cleaner and a Liberty airbox.

SuBaRiNo · Post by **SuBaRiNo** » Sat Sep 06, 2008 8:03 pm

Yeah there my pics. Snorkel is off a toyota hilux from memory... i would need to check... it's been a while.

Also for your information the front half of my car is exactly the same as a brumby so this will work the same way on your car.

Also refer to these links for more info.
showthread.php?t=3540&highlight=Snorkel
showthread.php?t=4163&highlight=Snorkel

Dave