My New 22B :D Watch out Paul!!!

User avatar
maxxair
Junior Member
Posts: 393
Joined: Wed Mar 26, 2008 9:32 am
Location: HELL!!!, or Rockhampton, eithers fine
Contact:

Post by maxxair » Fri Aug 19, 2011 11:27 am

Image

Image

Image

Image

Image
Cheers, Rohan M.

Gravity.. PAH!! Watch this.:twisted:

http://www.BERSERKARU.com <For All Berserk Subarus<

User avatar
Green_eyed_liberty
Junior Member
Posts: 374
Joined: Wed Oct 05, 2005 10:00 am
Location: Gold Coast

Post by Green_eyed_liberty » Fri Aug 19, 2011 7:46 pm

hey buddy, what chassis are you running under the Brumby Shell? my TT01 wheelbase is too big for the shell :-(

User avatar
Green_eyed_liberty
Junior Member
Posts: 374
Joined: Wed Oct 05, 2005 10:00 am
Location: Gold Coast

Post by Green_eyed_liberty » Fri Aug 19, 2011 7:49 pm

Image

Image

Image

User avatar
Brumby Kid
General Member
Posts: 1297
Joined: Sun Jul 17, 2011 9:19 pm
Location: Belair S.A.

Post by Brumby Kid » Fri Aug 19, 2011 9:45 pm

Heey, where abouts did you guys get the brumby? and how mutch did it cost?
Cam
When life gives you a corner, drop a gear, pitch, and stomp the loud pedal
Bianca: 1991 Subaru Brumby
My First / Project car

EA81 Rebuilt by Tony Knight from knight Engines
2" body lift
25" 185r14 Yokahama Delivery Star, light truck tyres
2" Sports exhaust
Rear Aguip step/bar
Liberty seats
"Bianca"
[SIGPIC][/SIGPIC]
Dads Car: 02 Impreza WRX STi
Mums Car 08 Liberty Wagon

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sat Aug 20, 2011 3:03 am

Hi Maxxair,

Was looking on ebay and found this

On one side
http://www.ebay.com.au/itm/EZRUN-V2-600 ... 3a619a84b6

And on the other
http://www.ebay.com.au/itm/eZRun-5-5T-K ... 2a115461c2
and
http://www.ebay.com.au/itm/30A-Brushles ... 25664977ce


Lets say i get the cheap set that comes to $45
Would that be better than the factory kyosho engine ive got?
I'm not going to enter any competition or anything but just want to be competitive if the WA boys ever get together someday to race them:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

User avatar
maxxair
Junior Member
Posts: 393
Joined: Wed Mar 26, 2008 9:32 am
Location: HELL!!!, or Rockhampton, eithers fine
Contact:

Post by maxxair » Sat Aug 20, 2011 6:51 am

Nah, dont buy that ESC, its for a plane, and has no heatsink. as for the motor, go straight to the source, hobbyking. get a motor, esc and lipo in one hit.
It will be 50 times better than the stock motor. 50! you wont be dissapointed by the speed and power.

http://www.hobbyking.com/hobbyking/stor ... r_6T_.html << stupid fast

any of these....
http://www.hobbyking.com/hobbyking/stor ... r_ESC.html
http://www.hobbyking.com/hobbyking/stor ... verse.html
http://www.hobbyking.com/hobbyking/stor ... 1_12_.html

2s (7.4v) lipo battery. get a few plugs and bits and peices too. and a charger.
http://www.hobbyking.com/hobbyking/stor ... oved_.html

also get a cheap 2.4Ghz radio system. way better than the old crystal ones.

My chassis is a Tamiya TB-01 which has been long since discontined, but i chose, because it has metal diffs and driveline. besides the spur gears, which keep melting or tearing the centers out, and the driveshafts that keep breaking, and the wheels that the center twists out of, and the axels that shear off, its one tough car. good times. (get a slower motor than the 9000... ;) )
Cheers, Rohan M.

Gravity.. PAH!! Watch this.:twisted:

http://www.BERSERKARU.com <For All Berserk Subarus<

User avatar
guyph_01
Senior Member
Posts: 2515
Joined: Fri Jul 25, 2008 10:24 am
Location: Wilson WA

Post by guyph_01 » Sat Aug 20, 2011 11:32 am

Cool,

I though it would be much more expensive:p
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Image
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com

Post Reply

Return to “Guyph”