Page 3 of 7

Posted: Sun Sep 26, 2010 8:03 am
by rtcb65
chridk wrote:Hey Rick lookin good, did you sort the shifter linkage problem ?
Cheers Chridk
Hey Chris,

Looks like we worked it out . Wont know totally , till i can take it for a drive. Still need the rear section of the tail shaft 900mm long before i can take it for the drive though.

Posted: Sun Sep 26, 2010 3:16 pm
by rtcb65
Looks like it might be going blue soon than i wonted. I masked an area off to Fix up the paint . When it was sprayed , i took the masking tape off , and off come more clear coat. So blue it is.

Image

Posted: Sun Sep 26, 2010 10:50 pm
by d_generate
Have those wheels been polished and re-cleared, they look pretty shiny compared to mine & I've been thinking of doing it too.

Posted: Mon Sep 27, 2010 10:37 am
by Venom
What did you guys end up doing with the cruise control switch? This weekend I changed from a centre console mounted one like you have to a dash mounted one i picked up from the wreckers. Dash mounted one is in a much better position as its right near your hands when driving. Wiring was the same except for one wire which is just a different colour.

Cheers,
Rhys

Posted: Wed Sep 29, 2010 4:04 pm
by rtcb65
Slowly getting it sanded back.

Image

Posted: Wed Sep 29, 2010 4:11 pm
by rtcb65
d_generate wrote:Have those wheels been polished and re-cleared, they look pretty shiny compared to mine & I've been thinking of doing it too.
Hey Mate
They haven't been done as you say . All i have done is run a cutting compound over them. The pic makes them look better than they really are..lol.

Venom wrote:What did you guys end up doing with the cruise control switch? This weekend I changed from a centre console mounted one like you have to a dash mounted one i picked up from the wreckers. Dash mounted one is in a much better position as its right near your hands when driving. Wiring was the same except for one wire which is just a different colour.

Cheers,
Rhys
Hey Venom,
That is what i am thinking of doing. Put the switch up onto the cluster surround , if it wont fit in any way with the range lever there now.

Posted: Tue Oct 05, 2010 4:16 pm
by rtcb65
Diff ratio now changed to suit gearbox and reinstalled. Now to get a tail shaft.

Image

Posted: Tue Oct 05, 2010 4:55 pm
by Matt
So if i get the Wagon dropped off do you think you can give a quick Respray to... :P

Posted: Tue Oct 05, 2010 7:06 pm
by rtcb65
Matt wrote:So if i get the Wagon dropped off do you think you can give a quick Respray to... :P
Do you think you can afford us..:p

Posted: Tue Oct 05, 2010 11:21 pm
by Matt
rtcb65 wrote:Do you think you can afford us..:p
Your right i can't afford the $2! Bahaha! Jokes!

You guys do an awesome job!!!

Posted: Wed Oct 06, 2010 3:32 pm
by rtcb65
Had the door trims off today and found the speakers had seen better days. The best way i have found to fit new speakers , is try to use what is already there. Minimal adapting that way.

Image

Image

Image

Image

Posted: Thu Oct 07, 2010 7:00 pm
by rtcb65
And on goes the undercoat.

Image

Posted: Thu Oct 07, 2010 8:09 pm
by Venom
Haha exactly the same thing i did with my speakers, i was pretty happy with the result too.

Posted: Thu Oct 07, 2010 8:17 pm
by riksta
hay Rick, what sort of blue are you going to put on the outback ?

Are you going with the blue metalic that would have come on that year of outback ?

Or maybe a WRK blue of some kind ? Maybe you will go with some other kind of blue
and not tell us till its all painted. And are you keep it two tone?

Whatever way you it will look good like all the things you guys put your hands on.

Rik.

Posted: Fri Oct 08, 2010 9:34 am
by rtcb65
Venom wrote:Haha exactly the same thing i did with my speakers, i was pretty happy with the result too.

Hey Venom, Seems to work well for the speakers. I found 6 inch speakers seem to fit the best. Is that the size you used.
riksta wrote:hay Rick, what sort of blue are you going to put on the outback ?

Are you going with the blue metalic that would have come on that year of outback ?

Or maybe a WRK blue of some kind ? Maybe you will go with some other kind of blue
and not tell us till its all painted. And are you keep it two tone?

Whatever way you it will look good like all the things you guys put your hands on.

Rik.
Hey Rik,

Na. it not a secret. I am tossing up two colours. Gen 2 or gen 3 blue. Yes i am going to keep it the 2 tone. I have always wonted to paint the 2 tone. Never got around to it with the M.Y.

Posted: Fri Oct 08, 2010 2:09 pm
by d_generate
Go for the new MY11 WRX blue, one of the guys over here had his 98 WRX done in it.........stunning colour.

Posted: Fri Oct 08, 2010 7:09 pm
by rtcb65
d_generate wrote:Go for the new MY11 WRX blue, one of the guys over here had his 98 WRX done in it.........stunning colour.
Hey Mate,

I will keep that in mind when i buy the color.

Posted: Sat Oct 09, 2010 3:02 am
by d_generate
Here ya go.

Image

Posted: Sat Oct 09, 2010 9:00 am
by rtcb65
d_generate wrote:Here ya go.

Image
Thanks Mate,

That looks almost the colour i had in mind. Give or take a couple of shades .

Posted: Mon Oct 11, 2010 5:45 am
by riksta
that would look real nice Rick with the tow tone.

Rik.