1986 Subaru Leone RX TURBO STi

Detailed reference pages on Members special projects ...
User avatar
FujiFan
Junior Member
Posts: 494
Joined: Sun Oct 31, 2010 8:32 pm
Location: CentralCoast NSW

Post by FujiFan » Fri Jul 03, 2015 3:13 am

Too me this car, for 30yr old + design Subaru as it is now for track use = aspirational
For a street car = exceptional!

Awesome results there :)

J.

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Sat Jul 11, 2015 6:23 am

El_Freddo wrote:Aww... Equal length extractors :(

Otherwise looking awesome mate!

Cheers

Bennie

thank you twin scroll set up works amazing on quick spool..


FujiFan wrote:Too me this car, for 30yr old + design Subaru as it is now for track use = aspirational
For a street car = exceptional!

Awesome results there :)

J.

with the ohlins and thoses bushings this thing is smooth as butter and on the track i shaved off 5sec on my time which I could not believe lol... so far so good i think..

















so since I was on the track and all most lost a motor to a faulty oil pressure sensor leaking I decided to get some proper equipment to finish the system off and new sensors.

Radium fuel rails and Bosch FPR adapter to keep it nice and simple and in series on my spare Spec-c V8 STi intake manifold.

I can build the proper lines now then swap them on to my Leone

Image

Image



also finally finished my new front bumper... JDM/USDM mixed with Canada top trim and impact beam.. fully mutt now lol.

Image


all done no more accidents please !!!... next to my favourite year Subaru 2015 got to get one of these

Image

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Sun Jul 19, 2015 2:42 pm

these are my new fuel and oil pressure sensors KAsensors and from just installing the oil pressure wow highly accurate

like to thank Franz @ Dieboldautosport for hooking me up with these bad boys !

Image

User avatar
FujiFan
Junior Member
Posts: 494
Joined: Sun Oct 31, 2010 8:32 pm
Location: CentralCoast NSW

Post by FujiFan » Sun Jul 19, 2015 3:27 pm

Cool.
High grade looking sensors and hardware there :)

J.

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Thu Feb 18, 2016 10:23 am

FujiFan wrote:Cool.
High grade looking sensors and hardware there :)

J.
no cheap thats for sure lol






















I guess I should update this build thread since new parts are being piled up for my Subaru Leone RX TURBO STi, as of now its in storage for winter but was building the Subaru Leone TURBO WRX NB-R Wagon version which can be found here --> http://forums.nasioc.com/forums/showthr ... ?t=2687011

Image


or insta gram https://www.instagram.com/big_bad_wolf_xo/


so I just ordered these EJ22T oil jets brand new from the dealership which if I remember right they couldn't be sold at the dealership which is a myth !.. also got the JDM STi quick steering sticker for my Leone.

Image


out of japan I finally found one of these rare STi 6mt Short shifters which was a task and has the serial number right on it from STi factory.

Image

Image

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Thu Feb 18, 2016 6:26 pm

Nico your wagon is madness ... pure madness well done.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
vk3fjmh
Junior Member
Posts: 54
Joined: Sun Apr 15, 2012 7:39 pm
Location: Victoria

Post by vk3fjmh » Thu Feb 18, 2016 6:32 pm

hi
i am after these parts


parts from 1986 -1990 subaru l series rx turbo or vortex turbo

vortex
dash surround
digital cluster
spider intake manifold
rear spoiler
rear lsd
rear disc brakes
rear sway bar
rear door spats


l series
efi turbo 3 plug loom with knockbox
flapper air flow meter
3 plug dissy with vacume advance
rear spoiler
rear sway bar
rear lsd
rear spoiler
checkerd inside door panels
6 gauge instrument cluster with surround
digital cluster
ea82t engine
mobile 0407 031 231

please let me know what you have
regards james

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Fri Feb 19, 2016 9:31 am

TOONGA wrote:Nico your wagon is madness ... pure madness well done.

TOONGA
thank you !
still a bit of work for the wagon to go its winter right now so I need it for the snow, once I can pull the white sedan out then I can finish it complete

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Fri Feb 19, 2016 9:31 am

vk3fjmh wrote:hi
i am after these parts


parts from 1986 -1990 subaru l series rx turbo or vortex turbo

vortex
dash surround
digital cluster
spider intake manifold
rear spoiler
rear lsd
rear disc brakes
rear sway bar
rear door spats


l series
efi turbo 3 plug loom with knockbox
flapper air flow meter
3 plug dissy with vacume advance
rear spoiler
rear sway bar
rear lsd
rear spoiler
checkerd inside door panels
6 gauge instrument cluster with surround
digital cluster
ea82t engine
mobile 0407 031 231

please let me know what you have
regards james

I'm in canada but I check for the small stuff for you

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Fri Feb 19, 2016 9:36 am

another cool part from japan R180 STi finned rear diff cover, helps cool the rear diff fluid.

Image

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Tue Apr 05, 2016 11:55 am

so new season and new SUPER Rare rims for that 90s style square look, these a hard to find even pictures of them !

JDM 16x8 5x100 ET35 Tecnomagnesio ..MAGNESIUM..

Image


aluminium caps with snap rings wow !

Image


Made In Italy

Image







off to the walnut blasting and ready for the gold paint job !

Image

User avatar
FujiFan
Junior Member
Posts: 494
Joined: Sun Oct 31, 2010 8:32 pm
Location: CentralCoast NSW

Post by FujiFan » Wed Apr 06, 2016 3:04 am

Simply Delicious :cool:

Out of curiosity, what is the weight of one of those?

J.

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Apr 07, 2016 1:21 am

Being magnesium I'd be very careful having them blasted - you don't want to damage them!!

I've heard stories about magnesium and polishing. I don't know how true they are but be careful none the less!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
QikRX
Junior Member
Posts: 88
Joined: Fri Feb 03, 2006 10:00 am
Location: Cruising on the Gold Coast
Contact:

Post by QikRX » Fri Jun 10, 2016 8:01 pm

If he does damage them, he's only got 7 other sets to choose from :D
02 GT Forester

User avatar
username
Junior Member
Posts: 204
Joined: Sat Apr 28, 2007 1:44 am
Location: Semaphore, ADL

Post by username » Wed Jun 15, 2016 5:17 pm

man this thing is so wild - good stuff

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Thu Jul 06, 2017 7:57 pm

so been really slacking on updates but lets try and catch up


I add a new turbo the old version died from Anti lag fun lol, new borg warner s300sx-e has better oiling and updated cover

Image

Image
Last edited by nico leone on Thu Apr 23, 2020 5:37 pm, edited 1 time in total.

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Fri Jul 07, 2017 6:29 am

I also swapped out the turbo blanket for the PTP Turbo Blanket, so much better design and construction then the DEI ones that fall apart

Image

I also swapped the Sparco Grid seat for a MOMO racing seat with higher bolsters to keep me snug while I'm on the track, the sparco grid is in my wagon version.

Image



Image
Last edited by nico leone on Thu Apr 23, 2020 5:38 pm, edited 1 time in total.

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Sat Jul 08, 2017 3:10 am

new tires, refreshed the paint on the Enkei ES tarmac 16x8j 5x100 et45

Image
Last edited by nico leone on Thu Apr 23, 2020 5:39 pm, edited 1 time in total.

User avatar
nico leone
Junior Member
Posts: 127
Joined: Sun Feb 09, 2014 11:12 pm
Location: Hamilton Ontario Canada

Post by nico leone » Sat Jul 08, 2017 3:36 am

i add DBA 2 piece rotors for better stopping on the track, the stoptec ones cracked

Image


I also add Forged Billet shifter forks, i was sick of the plastic tab suabru used for the stock STi 6MT transmission.

Image

Image
Last edited by nico leone on Thu Apr 23, 2020 5:40 pm, edited 1 time in total.

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sat Jul 08, 2017 11:26 am

Mate sweet updates as always!

The pic of the pulled down 6 speed is very interesting!

Reverse top front?
First and second lower front followed by third and forth in the middle of the main shaft and fifth and sixth hanging out back?

Looks solid.

Now to work out how to fit a traditional dual range transfer out the back for a stronger setup that would allow easy swapping of the low range...

Personally after seeing your leone with the gold rims the white rims just don't cut it the same for me :/

Keep up the good work - and the pics!!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

Post Reply

Return to “Restorations and Project Build Ups.”