Lupins MY99 wrx
- T.Farm.Brumby
- Junior Member
- Posts: 379
- Joined: Wed Jan 04, 2012 8:37 pm
- Location: North Brisbane
Looking good!
The tow point sticks out like dogs balls but I like it haha.
22B scoops and the blacked headlights make it look mean as. Keep up the good work
The tow point sticks out like dogs balls but I like it haha.
22B scoops and the blacked headlights make it look mean as. Keep up the good work
All The Rigs:
'86 RX Turbo "Thor"
'89 Brumby "Emma"
'89 Brumby "Brumbylicious"
'03 Outback "Uma"
'05 Forester
'14 Forester Luxury (My goodness is it schmick!)
'86 RX Turbo "Thor"
'89 Brumby "Emma"
'89 Brumby "Brumbylicious"
'03 Outback "Uma"
'05 Forester
'14 Forester Luxury (My goodness is it schmick!)
- 60766244
- Junior Member
- Posts: 586
- Joined: Fri Nov 09, 2012 3:32 pm
- Location: Kalamunda, Western Australia
The black looks mint I say! Looks great on almost all cars.
Otter the 2004 Outback with all the fruit.
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?
|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||
Did the center caps much happier now.
Now to get my fog light covers and front lip repainted.
Fitted a GD pedal set.
Possibly the most difficult thing I have ever done to the car. Partly because of the position its parked in at the moment, but mostly because the roll pin on the accelerator pedal just would not come out. Ended up putting on my butchers apron and hacking off the old pedal then drilling up the middle of the roll pin to soften it. Guess after 14 years it was fairly stuck.
Had the car out for a bit of a run today, so snapped some shots. I'm still not settled on the black wheels though.
Now to get my fog light covers and front lip repainted.
Fitted a GD pedal set.
Possibly the most difficult thing I have ever done to the car. Partly because of the position its parked in at the moment, but mostly because the roll pin on the accelerator pedal just would not come out. Ended up putting on my butchers apron and hacking off the old pedal then drilling up the middle of the roll pin to soften it. Guess after 14 years it was fairly stuck.
Had the car out for a bit of a run today, so snapped some shots. I'm still not settled on the black wheels though.
Bolted in the rear strut brace I picked up for added shinny stuff and placebo effect.
Thought seeing as I've been bed ridden for a couple of days with some dodgy virus, I though might put my gauges in my gauge pod.
Excuse the crappy pictuers I not feeling the best.
Will make the hood so it still lifts up like the lid did because with the double din there is no other storage.
And the opening ceremony (cbf imbedding)
http://www.youtube.com/watch?v=j64euVte ... e=youtu.be
Changed the cluster over to white led's. Took a fair bit to remove the green but I got it done. It will need a diffuser layer in there to even the light out but its not as bad as I thought it would be.
Thought seeing as I've been bed ridden for a couple of days with some dodgy virus, I though might put my gauges in my gauge pod.
Excuse the crappy pictuers I not feeling the best.
Will make the hood so it still lifts up like the lid did because with the double din there is no other storage.
And the opening ceremony (cbf imbedding)
http://www.youtube.com/watch?v=j64euVte ... e=youtu.be
Changed the cluster over to white led's. Took a fair bit to remove the green but I got it done. It will need a diffuser layer in there to even the light out but its not as bad as I thought it would be.
Thread update time.
Played with some vinyl wrap. Doesn't go that well on MDF. When you peel it off it pulls bits of MDf with it then you end up with an uneven finish.
Will leave it this way for the next little while and do something better later on.
Also needs some more trimming around the outside.
New wheels.
Played with some vinyl wrap. Doesn't go that well on MDF. When you peel it off it pulls bits of MDf with it then you end up with an uneven finish.
Will leave it this way for the next little while and do something better later on.
Also needs some more trimming around the outside.
New wheels.