audison amps v alpine amps

[Alex]

hi all,

i know a few people will have a few words to say as i am comparing alpine with audison...but i have a few questions/need advice..

i am currently running an alpine v12 mrp-345, which is running my front focal splits(165 v1), and then bridged to my 13inch focal sub (33V1)

http://www.focal-fr.com/car/en/polyglass/index.htm

i then have a small alpine 2channel running my 6x9's in the rear..i have recently blown a channel on the small amp, and i am looking to free up the rear channels on the big alpine amp to run my 6x9's..

therefor i need an amp to run my sub, ive been looking at the alpine mrd605

600W x 1 RMS [2Ω @ 14.4V 1% THD]
400W x 1 RMS [4Ω @ 14.4V 1% THD]
400W x 1 RMS [2Ω @ 12V 1% THD]
250W x 1 RMS [4Ω @ 12V 1% THD]
S/N Ratio 90dBA (IHF A Weighted Reference at Rated Power into 4Ω)
Thermal Management

or the audison LRX 1.400

http://www.audison.it/prodotti.asp?lang ... prodotto=4

what do people think?, what can you recommend? experiences, etc etc

obviously i'm after a sound quality set up!

thanks

alex

[Chris_Rogers]

audison LRX. cleaner amp than the alpine and a bit more efficient.

[Wilbur]

Yep, audison. Awesome.

[schultzie]

all i can say is that i have had no dramas with my M605 amps cant comment on how much power they use, and with the type r subs it sounds mint

[Alex]

yeh ive ben looking at the alpine...abit less hurt on the pocket too!

alex