Carpet

Put your take on things that go into Subies here ...
Post Reply
User avatar
FROG
General Member
Posts: 1409
Joined: Fri Feb 23, 2007 12:41 pm
Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
Contact:

Carpet

Post by FROG » Thu May 26, 2011 12:47 pm

Anyone here bought a moulded car carpet for their Subie
Ive been quoted $136.50 landed at my door from ALLCARCARPETS

Any thoughts on quality and fit??

cheers Andy
ImageImageImageImageImage
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS

User avatar
rtcb65
General Member
Posts: 1354
Joined: Sun Jul 29, 2007 1:07 pm
Location: Gympie
Contact:

Post by rtcb65 » Thu May 26, 2011 1:35 pm

FROG wrote:Anyone here bought a moulded car carpet for their Subie
Ive been quoted $136.50 landed at my door from ALLCARCARPETS

Any thoughts on quality and fit??

cheers Andy
Hey Andy,

I have fitted a ALLCARPETS carpet. Not to a subie , it went in to a charger. It almost went straight in . A cut here and cut there just to make it fit better to that car. Back then , when i fitted it , a few years ago now, they weren't as good as today's carpet , but was still nice. Looked the goods.

Now that i think about it , it may have been a TRUE FIT CARPET.
rtcb65
------------------
Redneck Rick.

1997 Gen 3 outback. GT forester wheels . Hopefully more changes to come. Proud Supporter And User of -----------C R O S S B R E D --- P E R F O R M A N C E ---- Products


[SIGPIC][/SIGPIC]

User avatar
Backyard_Brumby
Junior Member
Posts: 259
Joined: Wed Dec 01, 2010 10:47 am
Location: Brisbane
Contact:

Post by Backyard_Brumby » Thu May 26, 2011 4:50 pm

just took delivery for a moulded carpet from allcarcarpets...looks the goods so far, quality seems good however have not yet fit it up to the brumby....It looks a little big (more like the wagons) but then again my eyes could be deceiving me
[SIGPIC][/SIGPIC]James :D

User avatar
FROG
General Member
Posts: 1409
Joined: Fri Feb 23, 2007 12:41 pm
Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
Contact:

Post by FROG » Thu May 26, 2011 5:42 pm

rtcb65 wrote:Hey Andy,

I have fitted a ALLCARPETS carpet. Not to a subie , it went in to a charger. It almost went straight in . A cut here and cut there just to make it fit better to that car. Back then , when i fitted it , a few years ago now, they weren't as good as today's carpet , but was still nice. Looked the goods.

Now that i think about it , it may have been a TRUE FIT CARPET.
Rang Truefit and after a while I was told no suitability on the L
Rang Allcarpets direct and got offered 120 plus 16.50 freight to my door , which I thought was pretty good .
I bought a maroon Charger in Brisbane in 1989 :-) was a champion ride I loved it - drove it around Australia for a year and finally put it to rest in a Perth scrapyard - I think I spilled a tear or two that day :(
ImageImageImageImageImage
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS

User avatar
FROG
General Member
Posts: 1409
Joined: Fri Feb 23, 2007 12:41 pm
Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
Contact:

Post by FROG » Thu May 26, 2011 5:51 pm

Backyard_Brumby wrote:just took delivery for a moulded carpet from allcarcarpets...looks the goods so far, quality seems good however have not yet fit it up to the brumby....It looks a little big (more like the wagons) but then again my eyes could be deceiving me
They are hard to judge, you may have to cut the rear end off maybe
What did you pay if you don't mind telling?
ImageImageImageImageImage
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS

User avatar
El_Freddo
Master Member
Posts: 12506
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Thu Jun 16, 2011 5:57 pm

I've got one for a brumby sitting at home waiting for the "free time" day were I can take the interior out and fit it.

I think the cost was $140 delivered... I should really look at getting it installed, Sunnie will be a new ride with some floor covering!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Silverbullet
Senior Member
Posts: 2870
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Mon Jul 11, 2011 8:09 pm

Seen a few around for sale on the net, was thinking about one for the M.Y. When you fit one do you have to put adhesive of some sort down first? I thought it might be tricky getting all the holes (for seat bolts and seatbelt latches etc) lined up properly so it sits flat and smooth.
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
David D
Junior Member
Posts: 209
Joined: Sat Dec 11, 2010 4:54 pm
Location: Adelaide, SA

Post by David D » Sat Jul 30, 2011 10:16 pm

I just fitted a Trufit moulded carpet in my Brumby. It was around $180 for front and back plus standard underfelt. I could have got a slightly cheaper one but they were out of stock so I paid a little extra for a better quality one.
The fit is good. It was difficult to cut out all the holes and the bits around the shift levers and handbrake. It came with no cut outs at all so it was in and out a million times while I cut little bits off here and there. The holes for seats and seatbelts were the worst as there is no real room for error. I cut it so I could just get the bolts through but this made it really hard to line up.
There was a bit extra on the sides and back and I trimmed the minimum amount off and just tucked it under the trim. I didn't use any glue or anything, just let the trim hold it in place. I did stick some underfelt to the inside of the plastic panel under the rear window hoping it will reduce some noise.

David

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Sun Jul 31, 2011 8:23 am

you might spill another tear if you knew what that Charger was worth today :)

User avatar
FROG
General Member
Posts: 1409
Joined: Fri Feb 23, 2007 12:41 pm
Location: UNDER THE SOUTHERN CROSS GRIFFITH NSW
Contact:

Charging

Post by FROG » Sun Jul 31, 2011 9:13 am

Image


Image


Image

Just found some real old photos circa 1989 NT to WA
ImageImageImageImageImage
GRAB THE VIN FROM DONOR VEHICLES
AUSubaru member specials
Brumby EA81 Oil Pump kit (4 x 'o'rings + gasket) posted Australia wide $22!
Brumby sloppy shifter bush kit $44 posted
email me
http://www.domsmotors.com.au
NOW DISTRIBUTING FOR SUBAXTREME BASH PLATES, NUDGE AND BULLBARS

Post Reply

Return to “Product Reviews”