Page 1 of 1
difference between L series and brumby lift kits
Posted: Wed Sep 01, 2010 11:53 pm
by Mr Top Hat
Hi all
just got my 3inch lift kit from subi wan kenobi
on the box it says 3inch brumby kit
i own a l Series, i should i be worried or is the brumby kit the same as a L series kit?
is anyone able to tell the difference?
im happy to take photos if it helps.
thanks Rob
Posted: Thu Sep 02, 2010 12:17 am
by AndrewT
post up photos of it all laid out on the floor. Should be able to tell straight away.
One give-away would be the strut top blocks for the front struts - L series strut tops have three bolts, Brumby have two.
Probably also a good idea to check with SWK too, he'll be able to verify better than anybody!
Posted: Thu Sep 02, 2010 12:17 pm
by Mr Top Hat
here's some photos of the strut blocks, there deffinatly brumby type :'-(
i guess i have to send it all back
Posted: Thu Sep 02, 2010 2:21 pm
by TOONGA
yep that is a brumby lift top
well that sucks I suppose you were ready to install it this weekend as your fathers day prezzie to yourself
TOONGA
Posted: Thu Sep 02, 2010 2:25 pm
by Mr Top Hat
yeah i think swk makes them to order so i think im going to have to wait a while for him to make another one :'-(
TOONGA wrote:yep that is a brumby lift top
well that sucks I suppose you were ready to install it this weekend as your fathers day prezzie to yourself
TOONGA
Posted: Mon Sep 27, 2010 9:55 pm
by longy99gt
well, im looking for a lift kit for a brumby,
have you sent it back yet?
Posted: Mon Sep 27, 2010 10:05 pm
by Mr Top Hat
yeah i have sorry mate
longy99gt wrote:well, im looking for a lift kit for a brumby,
have you sent it back yet?
Posted: Tue Sep 28, 2010 11:12 pm
by longy99gt
hahah damn, ohwell
what was it worth?
Posted: Wed Sep 29, 2010 12:56 am
by Mr Top Hat
i paid $590 + $60 freight looked very good quality
longy99gt wrote:hahah damn, ohwell
what was it worth?
Posted: Wed Sep 29, 2010 11:40 pm
by wazza945
when was the last time you were in contact with mr. lift kit (SWK) ?
i'm after a 6" and i haven't heard anything back yet - whats the best way to get some info on price and how long til i can get one?
i know it says be patient in the sticky thread but im a bull at the gate and keen to get cracking on with it!
my 2" lift is doing my head in!
Posted: Thu Sep 30, 2010 1:45 pm
by Mr Top Hat
well i can only tell you my experience with it, it may have changed not sure
from payment to receiving it was a bit over a month.
pm him its the only way as far as i know.
Rob
wazza945 wrote:when was the last time you were in contact with mr. lift kit (SWK) ?
i'm after a 6" and i haven't heard anything back yet - whats the best way to get some info on price and how long til i can get one?
i know it says be patient in the sticky thread but im a bull at the gate and keen to get cracking on with it!
my 2" lift is doing my head in!
Posted: Sat Oct 23, 2010 11:05 pm
by Mr Top Hat
hi
was installing my newly arrived Lift kit today
and i have a question
have i installed the rear strut spacer correctly? see photo
if thats correct all i need to do is buy some nuts and spring washers?
cheers Guys
Top Hat
Posted: Sun Oct 24, 2010 1:18 pm
by AndrewT
Yeah looks correct. The kits used to come complete with all required nuts, bolts and washers...but I guess if they are missing then you will need to buy them separately.
Make sure they are 8.8 rated ones.
Posted: Sat Apr 09, 2011 2:58 am
by Morrie
wazza945 wrote:when was the last time you were in contact with mr. lift kit (SWK) ?
i'm after a 6" and i haven't heard anything back yet - whats the best way to get some info on price and how long til i can get one?
i know it says be patient in the sticky thread but im a bull at the gate and keen to get cracking on with it!
my 2" lift is doing my head in!
Well if you have a 2inch kit you don't like, i'll take it off your hands..