So I replaced a wheel bearing on my Brumby a while ago (about a year, hasn't done much driving since)
Got it roadworthied today and apparently the wheel bearing is stuffed.
Only thing I can think of is that the steering knuckle itself is worn as the bearings were new. I even got a mechanic to press them in and grease them for me so I couldn't screw it up.
Thoughts?
wheel bearing
make sure the hub nights are super tight
when they do road worthyness they usually just jack it up and give the wheel a jiggle.
loose hub nut will give the same feeling as a rooted bearing.
alex
when they do road worthyness they usually just jack it up and give the wheel a jiggle.
loose hub nut will give the same feeling as a rooted bearing.
alex
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.
previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.
previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.