The ***ALL NEW*** AUSubaru.com.au Forums

hi guys

i have a 92 brumby standard everything ATM.

I had problems using a lot of fuel - solved i think i put a carbie kit though found the boot on the pump assy had split in two places... that explains using 15l/100 while puttin around town!!! not good @$1.69 Lt

unfortunately while either taking apart or putting back together the fuel/air mixture needle striped the thread....... bugger.

nothing in my town to tap n' die such a fine thread pattern.

The solutions i have ATM are
1. to send the whole thing somewhere for a total overhaul. probably cost more than $400. incl postage ....... too expensive
2. find a throttle body or carbie that matches the bolt pattern at the manifold, that hopefully 1 of you guys may be willin to part with for a reasonable $$
(enclosed diagram of throttle body)

when she's clean



this is the first deflating tyre on my mates car


both front tyres going down on mine. broke the bead on one and punctured the other




pegga loving it


after swamping it

when she's clean



this is the first deflating tyre on my mates car


both front tyres going down on mine. broke the bead on one and punctured the other




pegga loving it


after swamping it


I didnt think to take pics of the car when it was in the drink.. too busy stressing out. Water was just below the cd player.

I've got an L-series carby you can have for the postage cost.
Was working when engine removed but it's been sitting for a year.
Let me know....