Brumby Coefficient of drag?
- Thalass
- Junior Member
- Posts: 473
- Joined: Sat Nov 03, 2007 12:21 am
- Location: North Bay, Ontario, Canada
Brumby Coefficient of drag?
I'm just wondering what the CoD of the Brumby is. The 1st gen sedan's CoD is around 0.337, I think with the tarp on the back the brumby could be similar.
Also: What's the curb weight, frontal area, all that stuff? I've just looked in the tech manual, but there doesn't seem to be anything.
thanks folks
Also: What's the curb weight, frontal area, all that stuff? I've just looked in the tech manual, but there doesn't seem to be anything.
thanks folks
Living in Canada now. Looking at all these SVXs for sale...
I'VE GOT AN OUTBACK AGAIN WOOT
I'VE GOT AN OUTBACK AGAIN WOOT
- brumbyrunner
- General Member
- Posts: 1743
- Joined: Mon Apr 10, 2006 10:00 am
- Location: SEQ
Curb weight will be in a brochure somewhere.
I weighted my stock-as-a-rock 92 Brumby before I started pulling it apart. It was a neat 1 tonne with replacement alloy bar and towbar on.
Also recently weighed my '90 Brumby with EA82T, constant 5-speed, rear discs, bullbar, towbar, rear step, 2" lift, rear coils, 14" alloys with heavy 8 ply tyres and only came to 1200kgs.
I weighted my stock-as-a-rock 92 Brumby before I started pulling it apart. It was a neat 1 tonne with replacement alloy bar and towbar on.
Also recently weighed my '90 Brumby with EA82T, constant 5-speed, rear discs, bullbar, towbar, rear step, 2" lift, rear coils, 14" alloys with heavy 8 ply tyres and only came to 1200kgs.
Settlement Creek Racing
- Thalass
- Junior Member
- Posts: 473
- Joined: Sat Nov 03, 2007 12:21 am
- Location: North Bay, Ontario, Canada
Ah thankyew, that's a good start. 1200kg should work as a good estimate for the time being. I suppose the CoD would be roughly the same as the leone, as long as it had the tarp on the back, so I'll just have to find that.
Living in Canada now. Looking at all these SVXs for sale...
I'VE GOT AN OUTBACK AGAIN WOOT
I'VE GOT AN OUTBACK AGAIN WOOT
The 1981 sales catalogue states the MY sedan has a drag coeffcient of 0.45 (and it goes on to say that it is better than most four cylinder cars on the market!).
I doubt a Brumby will be any better, the short roof would not do much for drag.
Oh yeah, the same catalogue lists the Brumby's weight as 975kg.
I doubt a Brumby will be any better, the short roof would not do much for drag.
Oh yeah, the same catalogue lists the Brumby's weight as 975kg.
Old Boxer Tricks
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe
1980 Brumby
1978 4WD Station Wagon
1974 DL Sedan
1974 GSR Coupe
- brumbyrunner
- General Member
- Posts: 1743
- Joined: Mon Apr 10, 2006 10:00 am
- Location: SEQ
I would like to do this myself. Especially because I am 90% dependant on solar energy (the other 10% is still diesel), I can recharge the cars batteries without using coal burnt power.
I read the kiwiev thread. Very interesting and he makes it all sound pretty easy. Didn't realise all the tech info and stores were allready catering for this market. So much to do so little time.....and I still want to build the worlds first diesel Brumby as well.
I read the kiwiev thread. Very interesting and he makes it all sound pretty easy. Didn't realise all the tech info and stores were allready catering for this market. So much to do so little time.....and I still want to build the worlds first diesel Brumby as well.
Settlement Creek Racing
- brumbyrunner
- General Member
- Posts: 1743
- Joined: Mon Apr 10, 2006 10:00 am
- Location: SEQ