The AUSubaru.com.au Forums

gday

looking for some info or a diagram for ej22 cam and crank timing marks
wanting to know the position of angle marks on the cam and crank wheels so i can program my new ecu

and if there the same as 1999-2000 ej20 cause thats in the program ej22 is not
the ecu is adaptronic

chears
Mathew

v1-6 should all be the same
im pretty sure all the cranks are interchangable, and therefore crank sprocket

ive got a link and the sensor is called subaru v1-6
im running an ej25 crank with 2.2l block and im pretty sure its the 2l crank sprocker....

i have a good diagram in a manual of how they work if you need it...

that would be great johnney
ill have too see if it works and go from there

here we go...

chears
thanks muchley

just posting this info for everyones benifit

while searching for something else i found the same diagram for an ej22
it looks like there the same havent confermed yet inn see if it starts

though the guys on the adaptronic forum think that the ej25 on the newer wrx has a differant set of marks