Page 1 of 1
1991 Liberty Series 1 or 2 ?
Posted: Thu Oct 30, 2008 5:01 pm
by caboolture
Trying to work out what my 9 month 1991 Liberty GX awd Wagon is.
Is it a series 1 or 2 ? does have a gen 1 or 2 tag and will original gen 2 1996 outback rear struts/coil bolt straight on. It has a 3 '' lift.
Posted: Thu Oct 30, 2008 5:07 pm
by BrennyV
from your sigpic it would appear to be a gen1 s2
Posted: Thu Oct 30, 2008 6:46 pm
by Bumpty
Check out this thread mate >
http://ozliberty.com/forums/showthread.php?t=11939
I think you should put a thread up in the 'my ride' section, would like to see more shots of the lib
(may help us tell you what you have
)
Also, if it is a s2... Yes gen2 (96 - [beginning of 98]) outback struts will swap straight in, rear and front.
Posted: Thu Oct 30, 2008 6:51 pm
by RetroLover
WTF. Ive got a 91 Liberty, but its a gen1 ser1. Interesting, so both gen1 ser1 and 2 where sold during the same year, didnt know that.
Posted: Thu Oct 30, 2008 10:30 pm
by Subafury
looks like a s2. 91 was the crossover year- the later ones obviously s2. easiest way i reckon is check the headlight- if the inner edge is dead straight- series 2, if slightly rounded- s1.
Posted: Sat Nov 01, 2008 12:29 pm
by chubby37
the car you have is a gen 1 series 2 for sure....the outback front struts will fit it the front but the backs wont as the springs are tapered...you will need to go to a shocky place and get some to fit...fulcrum do them.....or the other option is put in 2 or 3 inch stut tops and give it a suspension lift that way...not to sure is you could put your springs and tops on the outback rear to fit?
Posted: Sat Sep 26, 2009 9:03 am
by SUBYDAZZ
Every Subaru model year starts the year before, although it appears to change which month it starts with each model.