EJ engine/gearbox bolts - starter bolt

For those seeking stuff - put your add here ...
Post Reply
User avatar
El_Freddo
Master Member
Posts: 12502
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

EJ engine/gearbox bolts - starter bolt

Post by El_Freddo » Sun Aug 14, 2016 9:19 pm

G'day,

I'm after four EJ engine/gearbox bolts for the Starter side only.

Reason being that I need to get my engine onto an engine stand and the starter bolt measures up to be long enough for what I need and are the same thread as the lower studs (which will be removed for this exercise). I currently don't have time to visit a parts yard where I can grab them from 4 vehicles (too far to go and local parts yards don't have any subarus - what's up with that??).

If anyone has a bolt that I could borrow or purchase please drop a line here or PM me.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Tue Aug 16, 2016 3:01 pm

Bennie, I can help you out with these no problem. If you could PM me a photo showing exactly where the bolts are located I can pull them from PAP Kilsyth for you by the weekend.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
El_Freddo
Master Member
Posts: 12502
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Wed Aug 17, 2016 7:40 am

G'day Dfoyl,

Your PM inbox is full, so I thought I'd drop this in here instead ;)

I'm after four of the bolts in this location:

Image

You'll find it hiding under the heater hoses, where the earth cable bolts to the gearbox/engine bolt at the starter motor (generally):

Image

You'll need a 14mm spanner/socket must be EJ specific - otherwise It won't work!

Clear some PM space, shoot me one and we'll workout cost/postage etc

Cheers

Bennie
Attachments
EJgearboxandengine.jpg
EJgearboxandengine.jpg (60.54 KiB) Viewed 1035 times
EJgearbox.jpg
EJgearbox.jpg (89.7 KiB) Viewed 1035 times
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

Post Reply

Return to “Wanted”