G'day,
I'm after four EJ engine/gearbox bolts for the Starter side only.
Reason being that I need to get my engine onto an engine stand and the starter bolt measures up to be long enough for what I need and are the same thread as the lower studs (which will be removed for this exercise). I currently don't have time to visit a parts yard where I can grab them from 4 vehicles (too far to go and local parts yards don't have any subarus - what's up with that??).
If anyone has a bolt that I could borrow or purchase please drop a line here or PM me.
Cheers
Bennie
EJ engine/gearbox bolts - starter bolt
Bennie, I can help you out with these no problem. If you could PM me a photo showing exactly where the bolts are located I can pull them from PAP Kilsyth for you by the weekend.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
- El_Freddo
- Master Member
- Posts: 12506
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Bridgewater Vic
- Contact:
G'day Dfoyl,
Your PM inbox is full, so I thought I'd drop this in here instead
I'm after four of the bolts in this location:
You'll find it hiding under the heater hoses, where the earth cable bolts to the gearbox/engine bolt at the starter motor (generally):
You'll need a 14mm spanner/socket must be EJ specific - otherwise It won't work!
Clear some PM space, shoot me one and we'll workout cost/postage etc
Cheers
Bennie
Your PM inbox is full, so I thought I'd drop this in here instead
I'm after four of the bolts in this location:
You'll find it hiding under the heater hoses, where the earth cable bolts to the gearbox/engine bolt at the starter motor (generally):
You'll need a 14mm spanner/socket must be EJ specific - otherwise It won't work!
Clear some PM space, shoot me one and we'll workout cost/postage etc
Cheers
Bennie
- Attachments
-
- EJgearboxandengine.jpg (60.54 KiB) Viewed 1050 times
-
- EJgearbox.jpg (89.7 KiB) Viewed 1050 times