Hi all,
Its been a while since i posted on here but im in desperate need of help from someone on here, if anyone can that is. I need a replacement tail shaft to suit a 1989 Subaru Vortex XT AWD 4 speed automatic. Must be for the 4 speed auto transmission. I know not many of these made it into Australia and even fewer are left but im hoping that someone may have done a manual swap and is wrecking a complete vehicle and would have one of these they are willing to sell. Thanks for looking.
WTB: Subaru Vortex 4 speed auto tail shaft
- El_Freddo
- Master Member
- Posts: 12506
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Bridgewater Vic
- Contact:
Hey mate, have you looked into having your current one refurbished?
I know of a place in Shepparton here that will replace the uni joints if that's the issue. I'm sure there would be a place near you that could do the same job. I've seen L series tail shafts fitted with a replaceable uni joint from an 80's Holden or Mitsubishi, can't remember exactly.
I hope this helps even if its a last resort.
Cheers
Bennie
I know of a place in Shepparton here that will replace the uni joints if that's the issue. I'm sure there would be a place near you that could do the same job. I've seen L series tail shafts fitted with a replaceable uni joint from an 80's Holden or Mitsubishi, can't remember exactly.
I hope this helps even if its a last resort.
Cheers
Bennie