The AUSubaru.com.au Forums

Looking for a set of (5) original MY/Brumby Sunnies style white rims (and caps if possible) with 140mm PCD x 4 stud.
Need to be in good condition with no cracks or major rust.
Need to be a max of 45mm offset but less, ie, 35mm better.
L series Sunnies no good as I already have a set of these and they are 55mm offset.
The wanted rims will be 5"' wide.
Happy to pay freight but if anyone is in the Hunter Valley near Newcastle I can come and pick them up.
Let me know what is out there.

i have a set that came on my Brumby. all really nice condition with chrome trims and center caps.

wish i saw this earlier, as i was in Maitland last night

not sure what they are worth, they will no longer fit my brumby (5x100 conv)

The rims sound good.
The offset is critical for what I am after.
If possible could you please measure the distance (on the inner rim side) from the outside edge of a rim to the face where the rim sits on the hub.
I know this isn't the offset dimension but I have measured both the MY alloys with an offset of 45mm and the dimension I am asking for about (in my case) is 122mm. Likewise on the 92 model L series rims their offset is 55mm and the dimension I am asking for is about 134mm.
Basically, the dimension I am asking for should be about-

MY/Brumby: 122mm
L series : 134mm

I will be looking for lesser dimension of 122mm or less.

Thanks for the reply.

I am back on this subject again.
Does anyone in the Newcastle area have for sale a set of (5) 13" x 5, Sunnie style OEM Subaru rims for an MY with a 40 to 45mm + offset (not L series with the 55mm + offset. I already have a set of these)