2" engine crossmember lift blocks - L series
Posted: Sun Jun 22, 2014 4:20 pm
Looking for a pair, thanks.
The AUSubaru.com.au Forums
One of Australia's original and top performing Subaru sites. Come and have a look and find out why so many people enjoy this site.***ONLINE SINCE SEPTEMBER 2018*** site address: www.ausubaru.com.au
https://ausubaru.com.au/
2" engine crossmember lift blocks - L series
Page 1 of 1
Posted: Thu Jun 26, 2014 3:35 am
I have an apple.. will that do?
Posted: Fri Jun 27, 2014 2:31 pm
I may be a Dad now, but even I won't pay that joke!
Posted: Fri Jun 27, 2014 5:39 pm
Why not make them yourself? A bit of 50mmx40mmx3mm (or 4mm if you want) with some crush tube welded in would be ample...
I'm sure you know how to measure twice and cut once, then the same for the two holes required and do the welding - I've seen some of your work and this to me should be a piece of cake for you.
Cheers
Bennie
I'm sure you know how to measure twice and cut once, then the same for the two holes required and do the welding - I've seen some of your work and this to me should be a piece of cake for you.
Cheers
Bennie
Posted: Fri Jun 27, 2014 7:06 pm
yes it would be, but I am building this car literally 15 minutes at a time, whenever I can squeeze off a spare moment. I barely have time to go to the shops to buy more welding wire. If someone has some blocks I'll grab them. As it happens, Paul has some for me.