Wanted Scorpion Rims x 5

For those seeking stuff - put your add here ...
Post Reply
User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Oops ...

Post by Bantum » Sat Mar 01, 2014 12:15 pm

Hey Phil,

I been trying to draw this up in SketchUp, but the drawing you gave me doesn't seem to add up ... ;)

So I want to confirm that 14" ( 355.6 mm ) is the diameter of 'seat' for tyre, width of spoke is 63.7 mm and that center hole is 93.1 mm ... ?

Image

Add : Ok - I think I have worked out what's going on - the copy has made the join @ spoke edge with a continuous ring - where as the original is just welded strait on it ... :/

The ring would make it stronger - but changes the look a bit ( which was throwing me until I figured it out ) Do you still want this ring ?

Cheers, Bantum ...
Top
User avatar
phil nelis
Junior Member
Posts: 100
Joined: Tue Aug 31, 2010 12:55 pm
Location: collingwood park qld

Post by phil nelis » Sat Mar 01, 2014 5:59 pm

The ring is in the centre so it can be fully welded not just in 5 spots to increase load capacity. I don`t think it changes it all that much but i think it will handle conditions alot better. It will be harder to bend one and less chance of structural deformaty but am pushing hard for the best warranty that`s why we are trying to make the strongest wheel we can in an affordable price range. You get what you pay for. The centre hole is 93.1mm +/-.1/.2mm to allow for powdercoat. And all other measurements have been taken from 3 different scorpion rims so they will be as close as possible.
Top
User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

New Rims ...

Post by Bantum » Sat Mar 01, 2014 8:03 pm

OK - here it is ... ( Note : I have also posted it on 3d Warehouse - but they have been playing 'update' games so may not work there yet )

Image

Add : Link here : 'Scorpion' Wheel

I've done it as per original ( welded directly ) will also try it the other way with a ring - still think it doesn't look as good that way ... :(

P.S. - Are we calling it a 'Scorpion' copy rim ?

Cheers, Bantum ...
Top
User avatar
Proton mouse
Junior Member
Posts: 378
Joined: Mon Nov 06, 2006 11:35 pm
Location: Diagonally parked in a parallel universe

Post by Proton mouse » Sun Mar 02, 2014 3:37 pm

They certainly look good in cad form but would like to see the dreaded 'ring' view as well before final judgement/commitment.

As for names....Scorpion 2's, Phinels, MYwheels (as opposed to iWheels, as they are for 'MY's lol), Bantums,

Pleiades (the star cluster in Subaru's emblem, for those not in the know) Kalbarri's, or maybe for overseas markets....MVious rims.
Top
User avatar
Kalbarri_baru
Junior Member
Posts: 230
Joined: Sun Mar 29, 2009 9:47 am
Location: Kalbarri W.A
Contact:
Contact Kalbarri_baru

Post by Kalbarri_baru » Sun Mar 02, 2014 8:22 pm

Proton mouse wrote:As for names....Scorpion 2's, Phinels, MYwheels (as opposed to iWheels, as they are for 'MY's lol), Bantums,

Pleiades (the star cluster in Subaru's emblem, for those not in the know) Kalbarri's, or maybe for overseas markets....MVious rims.
Phinels sound cool, or something with an Aussie identity in them if they are going overseas like "Aussie Roo's" "Hard Yakkas" yeahhhh gotta get me a set of hard yakkas, lol.

Cheers

WayneO.............
[SIGPIC][/SIGPIC]
Top
User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Sun Mar 09, 2014 11:05 pm

Bonza Rims :)
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
Top
User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Update ...

Post by Bantum » Mon Mar 10, 2014 12:10 am

Ok - I've finally manage to get the damn thing to upload a file to 3D Warehouse - so you can now download & play with it ... :) .... ( See link in previous post above )

Do note that I wouldn't rely on it being accurate for production purposes, but it should be good enough to get an idea of what it looks like ... ;)

Nelis / Bantum Rims ?

Cheers, Bantum ...
Top
User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Post by Bantum » Wed Apr 09, 2014 8:43 pm

Hey Phil - got any news for us on the new rims ?

Cheers, Bantum ...
Top
User avatar
phil nelis
Junior Member
Posts: 100
Joined: Tue Aug 31, 2010 12:55 pm
Location: collingwood park qld

Post by phil nelis » Thu Apr 10, 2014 6:45 pm

They are in production and are about 2 months away. Don`t ask for a price yet as we haven`t finalised all cost details yet. Colours are still up in the air, don`t have to decide yet. We`ll see how the 14`s go before we decide on a 15`` or not. production costs might stuff it .
Top
User avatar
FujiFan
Junior Member
Posts: 494
Joined: Sun Oct 31, 2010 8:32 pm
Location: CentralCoast NSW

Post by FujiFan » Fri Apr 11, 2014 2:07 am

:cool:
Top
User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Post by Bantum » Fri Apr 11, 2014 9:47 am

Thanks Phil, will wait until then to sew how they turned out ... :)

Cheers, Bantum ...
Top
User avatar
El_Freddo
Master Member
Posts: 12502
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Mon Apr 14, 2014 7:13 pm

phil nelis wrote:They are in production and are about 2 months away. Don`t ask for a price yet as we haven`t finalised all cost details yet.
Awesome! Did you go with the ring around the five spokes or the same as the original scorpions?

I'll be keen to see what they look like and what price they're available for.

Where are they being made?

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Thu Apr 24, 2014 12:48 pm

I'm still keen on a set, when will they be available?
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
Top
User avatar
phil nelis
Junior Member
Posts: 100
Joined: Tue Aug 31, 2010 12:55 pm
Location: collingwood park qld

Post by phil nelis » Thu Apr 24, 2014 5:12 pm

hoping to have them late this month. want to fit them to my car for photo shoot and product launch.
Top
User avatar
El_Freddo
Master Member
Posts: 12502
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Sat May 03, 2014 11:34 am

^ Sounds very official. Looking forward to it!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Tue May 06, 2014 11:17 am

Yeah.. can't wait for the pics :)
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals
Top
User avatar
El_Freddo
Master Member
Posts: 12502
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Fri Jun 27, 2014 6:39 pm

phil nelis wrote:hoping to have them late this month. want to fit them to my car for photo shoot and product launch.
Don't want to seem pushy, but it's time to resurrect this thread since it's almost July!

Any updates? Or better still, any PICS? :twisted:

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
Willy Fisterbottom
Junior Member
Posts: 330
Joined: Wed Feb 26, 2014 9:37 am
Location: NSW

Post by Willy Fisterbottom » Wed Jul 16, 2014 11:53 am

El_Freddo wrote:Don't want to seem pushy, but it's time to resurrect this thread since it's almost July!

Any updates? Or better still, any PICS? :twisted:

Cheers

Bennie
Bump!
Top
User avatar
Bantum
General Member
Posts: 1923
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Brumby Wheels ...

Post by Bantum » Fri Sep 12, 2014 11:26 pm

Update from Phil on FB ...
... New Brumby rims : 14 x 6", 950kg load rating, 93.1mm centre bore, 5mm thick centre, +55 offset ...
They come in Black & White & will sell for $ 120 Each + P&H ... :)
Image

Image

Please contact Phil on FB or on here if interested ... :)

Cheers, Bantum ...
Top
User avatar
phil nelis
Junior Member
Posts: 100
Joined: Tue Aug 31, 2010 12:55 pm
Location: collingwood park qld

Scorpion copy

Post by phil nelis » Sun Sep 14, 2014 9:35 am

Anyone else had a look yet. RSR555 has already made contact and is looking at shipping some to W.A when he gets back from work.
Top
Post Reply

Return to “Wanted”