The AUSubaru.com.au Forums

After the rear suspension from 2wd EA82 / Vortex with disc brakes. Needing the cross member, hubs and swing arms.

Preferably in SA

Thanks

Between me and 'steptoe' we would have the parts you need, perhaps PM us both...

PM sent

he's gone !

Ha ha... Sounds like problem solved

Anyway let me know today if you want this stuff, it's the last day I'm working on the car, going to the purley gates next week.
I have crossmember, arms, swaybar.
Step tie has the hubs, etc...

Hi, sorry about the delay. I just got back from holiday so still sorting out the mess of unpacking.

I'm building a trailer and don't need brakes. To save weight I want the hubs from disc brakes instead of drums. Any idea if the hubs can fit straight on to a normal 4WD drum brake rear end? Might save money posting all other large parts. Not looking to spend a whole lot on it as I know these parts aren't very useful to most people and I've seen a few 2WD Vortex's show up in the U Pull It yards around here...

Thanks,

We are thinking they are worth heaps - obviously we are on a different level

Yep no worries, will save me getting down on the ground again.

The first GLTA I bought came with drums to replace snaffled disc brake rear, but that was 4WD stuff, so reckoning 2WD drum rear will fit 2WD disc raer hub spindle

I understand why the 4 rear discs are worth a bit when sold with the hubs but I didn't think anyone wanted the 2WD ones as they won't work on 4WD models.

must still be enough FWD MY and L sedans getting about that could do with rear disc conversion. Latest market rates for FWD rear discs seems to be a smidge over $400

Apply within

Oh... well if that's the case I suppose I'll use different suspension... That's crazy expensive for what it is.

Thanks for the help anywho!