WTB Rear Disc for 92 Brumby

For those seeking stuff - put your add here ...
Post Reply
User avatar
badga880
Junior Member
Posts: 87
Joined: Tue Jun 18, 2013 5:32 am
Location: queensland

WTB Rear Disc for 92 Brumby

Post by badga880 » Tue Sep 17, 2013 5:26 am

Am needing a rear disc setup for a 92 Brumby as after having this ute for a couple of weeks now and being a drive some better response from the brake department would be an advantage. I am on the Gold Coast travel to Brisbane daily so can pick up I have phoned the wreckers but no luck chasing disc parts
Thanks in advance

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Tue Sep 17, 2013 8:24 am

You need to be asking about L series RX or 4WD Vortex or grey import wagons for bolt on disc set up for the Brumby. Make a god enough offer to twighlight protege for his RX for sale in QLD somewhere..you'll pay almost as much for the disc assy alone!

User avatar
badga880
Junior Member
Posts: 87
Joined: Tue Jun 18, 2013 5:32 am
Location: queensland

Post by badga880 » Tue Sep 17, 2013 5:45 pm

Thanks for that sent Twighlight a PM thanks again

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Tue Sep 17, 2013 7:50 pm

Or go to the 5 stud upgrade. The RX discs have become a lot rarer now, they used to be common in the US. I have looking for a few months now without success...
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
badga880
Junior Member
Posts: 87
Joined: Tue Jun 18, 2013 5:32 am
Location: queensland

Post by badga880 » Wed Sep 18, 2013 5:16 am

5 stud upgrade....bugger and just got some nice 4 stud mags... I will go search as I am going to remove motor and gearbox in the near future might be able to do that at the same time always depends on the finance dept thanks

Post Reply

Return to “Wanted”