Page 1 of 1

Turbo brumby project, some assembly req.

Posted: Sun Mar 08, 2015 1:36 pm
by Insane
Description...................... Explain a bit about it here

included is...
1 red 6 / 89 brumby minus motor radiator and fuel tank. Otherwise appears to be complete. Has aircon still connected. Has tow bar. Worth noting is that it has 4 stud rear disc brakes.
1 disassembled EA82T (complete)
1 New EA82T ring set
1 New EA82T gasket set
1 New EA82T bearing set
1 EA82T turbo
1 EJ18 complete and turns freely. Untested, appears to be in good condition
1 EJ22 complete except some bolts have been removed on manifold etc
1 Unused EJ type aftermarket turbo exaust manifold
2 Radiators with thermofans
3 computers and wiring (one is EA82 but unsure of others)
1 fuel tank
1 EA type 5 speed box. (there's also a box in the car)
1 set of original rear brakes
1 extra rear spring setup
1 box of electrical stuff
1 box of pumps gaskets and other miscellaneous crap
1 spare front bar
1 whale tail wing, no bloody idea what its off, maybe a civic? but you can have it to hang on a wall and use as a beer shelf...



Condition........................... Use one of these or similar; Excellent, Very good, Good, Average, Poor

Car has some dings but zero rust.
parts... some new, some old,
Inspections welcome.



Location ..........................Very important. Ads will be locked if this is not included

Ipswich QLD Australia,



Price................................$$$$$$$$

start at $2000 open to offers



Contact ............................

PM me.


Image
Image
Image
Image
Image
Image

Posted: Sun Mar 29, 2015 6:43 pm
by Insane
$1000 or make an offer.

Posted: Sun Mar 29, 2015 6:46 pm
by Insane
Image

Image