EOI: 4x140 to 5x100 bolt pattern adapters

YouTube · Post by **El_Freddo** » Tue Oct 20, 2015 11:00 pm

If you could have the little plate that blanks out the unused holes made up as a set with the hubs I reckon this would make the sale much more appealing!

At least it would to me. I know that this plate was made specifically to fill in the unused holes without welding - something that Gee's original engineer specified in the xbread kit.

The rest IMO is easy to do for a decent DIYer with access to a local machine shop (for the likes of the larger ball joint on the front end).

My only issue with this kit is the need to build front drive shafts to accommodate the EJ hub. More a PITA than anything!

Cheers

Bennie

dfoyl · Post by **dfoyl** » Wed Oct 21, 2015 11:10 am

Mr Toonga is sending me his sample, I believe shipping last week from WA, but not in hand with me yet. As soon as I receive it I'll send it off for quotation.

mrwalker500 · Post by **mrwalker500** » Wed Oct 21, 2015 5:49 pm

"Mr Toonga is sending me his sample, I believe shipping last week from WA, but not in hand with me yet. As soon as I receive it I'll send it off for quotation."
Send me a PM if you want to borrow mine. I have the xt6 backing plates too.
I would be keen to get hold of a plate to blank/ adapt the holes to fit ej calliper hangers.

henpecked · Post by **henpecked** » Wed Oct 21, 2015 6:29 pm

I don't want to peeve too much, but do any of you think you could start a separate thread for this reasonably unrelated stuff - and delete your posts in this thread ?

or conduct your business through PM ?

Ive not said anything for the last 3 pages as i thought eventually some-one would start a separate thread - but that has not happened

THE EOI is still open for the adapters, and anyone who got to this through GooGle will think the EOI is not on.

SO If you are looking to do something else, then I'm all for you doing it, just perhaps in a specific thread rather than this one ?

Its not too much of an effort to start up a new thread and copy your posts across, I'd do it for you but some-one may get their nose out of joint. I'll delete this post once this thread is cleaned up.

cheers

UPDATE

Thanks to dfoyl for deleting his off-topic posts in this thread- NOW if some one who wants to be responsible for it could start up another thread that would be good. Its idiotic for me to author a thread for others.

UPDATE

dfoyl has started an EOI thread here http://www.ultimatesubaru.org/forum/top ... 00-5x1143/

Post by **TOONGA** » Wed Oct 21, 2015 7:25 pm

mrwalker500 wrote:"Mr Toonga is sending me his sample, I believe shipping last week from WA, but not in hand with me yet. As soon as I receive it I'll send it off for quotation."
Send me a PM if you want to borrow mine. I have the xt6 backing plates too.
I would be keen to get hold of a plate to blank/ adapt the holes to fit ej calliper hangers.

Sorry there has been a delay as I have been busy turning 50.

hopefully early this week in the mail.

TOONGA

mattw · Post by **mattw** » Wed Oct 21, 2015 9:57 pm

henpecked wrote:I don't want to peeve too much, but do any of you think you could start a separate thread for this reasonably unrelated stuff - and delete your posts in this thread ?

or conduct your business through PM ?

Yeah, fair call. I suppose now days there aren't any admins or the usual forum police keeping an eye on conduct and keeping everyone in check.

adstrac · Post by **adstrac** » Sun Jan 21, 2018 4:14 pm

Hi Henpecked, old thread I know, but wondering if you still may have 2 pairs of the 4x140 to 5x100 adapters available? If so how much including postage to postal code 2795.

Thanks
adstrac

Post by **TOONGA** » Fri Feb 09, 2018 4:46 pm

adstrac wrote:Hi Henpecked, old thread I know, but wondering if you still may have 2 pairs of the 4x140 to 5x100 adapters available? If so how much including postage to postal code 2795.

Thanks
adstrac

a set on ebay

https://www.ebay.com.au/itm/Subaru-4WD- ... SwKIdactn4

Be quick

TOONGA