EOI: 4x140 to 5x100 bolt pattern adapters

Got something to sell ? Put it in here ...
User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Mon Oct 05, 2015 4:12 pm

If you can lend me one of yours I can have my TW guys quote it up in about a week, and back to you a week later. They love to copy from samples.
That said, a drawing with dimensional accuracy would be great if anyone knows where to find it. The supplier I use makes shafts for us for waterjet cutters to run at around 5000 rpm which should be sufficient for a wheel hub :)
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Mon Oct 05, 2015 8:03 pm

I know RSR555 had one 3D printed but I've no Idea of where he got the drawing.

I have on from an Xbread kit but it has no splines as the were destroyed because they weren't case hardened. :(

How would you case harden the splines?

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Tue Oct 06, 2015 6:17 pm

I can get case hardening done either locally or in TW. I'd be looking at 60HRC, but would need to bounce it off one of the engineers (luckily I work for a company that has a lot of material case hardened, and I also have across the road from work a company that does caravan axles with a nice sized machine shop).

One with stripped splines should be sufficient for quoting. I'd send one of mine but it'd leave me without transportation...
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Tue Oct 06, 2015 6:20 pm

dfoyl wrote:I can get case hardening done either locally or in TW. I'd be looking at 60HRC, but would need to bounce it off one of the engineers (luckily I work for a company that has a lot of material case hardened, and I also have across the road from work a company that does caravan axles with a nice sized machine shop).

One with stripped splines should be sufficient for quoting. I'd send one of mine but it'd leave me without transportation...
So how do I get it to you ? :)

It is in the shed rusting on a shelf.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Tue Oct 06, 2015 8:17 pm

How far can you throw :) I'll send you a PM.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
mattw
Junior Member
Posts: 189
Joined: Fri Oct 07, 2005 10:00 am
Location: Adelaide

Post by mattw » Tue Oct 06, 2015 8:23 pm

This is getting exciting, but I'll have to call the thread well and truely hijacked at this point.

User avatar
taza
General Member
Posts: 1417
Joined: Sun Dec 26, 2010 10:21 pm
Location: Perth, Australia

Post by taza » Tue Oct 06, 2015 10:14 pm

Awesome... im excited.. i bogged a set of resr hubs with spare ej and ea parts but i dont know if i'll trust myself fitting them.

User avatar
mattw
Junior Member
Posts: 189
Joined: Fri Oct 07, 2005 10:00 am
Location: Adelaide

Post by mattw » Tue Oct 06, 2015 11:13 pm

Mrwalker500 has a set fresh from the states, he is in western Victoria from what his profile says

User avatar
mrwalker500
Junior Member
Posts: 65
Joined: Mon Aug 17, 2015 8:17 pm
Location: Western Victoria

EOI: 4x140 to 5x100 bolt pattern adapters

Post by mrwalker500 » Tue Oct 06, 2015 11:37 pm

Perhaps I could loan you one for the greater good. It would be a good option for spares.


Sent from my iPhone using Tapatalk
[SIGPIC][/SIGPIC]
Wife, 'Oh that's nice, it can be our sons first car'
Me, 'Yes I will make it strong and safe' ...and fast, but there is no way a 17 year old is going to drive it.:lol:

User avatar
mattw
Junior Member
Posts: 189
Joined: Fri Oct 07, 2005 10:00 am
Location: Adelaide

Post by mattw » Tue Oct 20, 2015 9:54 pm

Ok, so have you guys got together on this one yet?

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Tue Oct 20, 2015 11:00 pm

If you could have the little plate that blanks out the unused holes made up as a set with the hubs I reckon this would make the sale much more appealing!

At least it would to me. I know that this plate was made specifically to fill in the unused holes without welding - something that Gee's original engineer specified in the xbread kit.

The rest IMO is easy to do for a decent DIYer with access to a local machine shop (for the likes of the larger ball joint on the front end).

My only issue with this kit is the need to build front drive shafts to accommodate the EJ hub. More a PITA than anything!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Wed Oct 21, 2015 11:10 am

Mr Toonga is sending me his sample, I believe shipping last week from WA, but not in hand with me yet. As soon as I receive it I'll send it off for quotation.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
mrwalker500
Junior Member
Posts: 65
Joined: Mon Aug 17, 2015 8:17 pm
Location: Western Victoria

Post by mrwalker500 » Wed Oct 21, 2015 5:49 pm

"Mr Toonga is sending me his sample, I believe shipping last week from WA, but not in hand with me yet. As soon as I receive it I'll send it off for quotation."
Send me a PM if you want to borrow mine. I have the xt6 backing plates too.
I would be keen to get hold of a plate to blank/ adapt the holes to fit ej calliper hangers.
[SIGPIC][/SIGPIC]
Wife, 'Oh that's nice, it can be our sons first car'
Me, 'Yes I will make it strong and safe' ...and fast, but there is no way a 17 year old is going to drive it.:lol:

User avatar
henpecked
Junior Member
Posts: 443
Joined: Fri Dec 05, 2008 7:20 pm
Location: South Oz

Post by henpecked » Wed Oct 21, 2015 6:29 pm

I don't want to peeve too much, but do any of you think you could start a separate thread for this reasonably unrelated stuff - and delete your posts in this thread ?

or conduct your business through PM ?

Ive not said anything for the last 3 pages as i thought eventually some-one would start a separate thread - but that has not happened :(

THE EOI is still open for the adapters, and anyone who got to this through GooGle will think the EOI is not on.

SO If you are looking to do something else, then I'm all for you doing it, just perhaps in a specific thread rather than this one ?

Its not too much of an effort to start up a new thread and copy your posts across, I'd do it for you but some-one may get their nose out of joint. I'll delete this post once this thread is cleaned up.

cheers
;)

UPDATE

Thanks to dfoyl for deleting his off-topic posts in this thread- NOW if some one who wants to be responsible for it could start up another thread that would be good. Its idiotic for me to author a thread for others. ;)

UPDATE

dfoyl has started an EOI thread here http://www.ultimatesubaru.org/forum/top ... 00-5x1143/

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Wed Oct 21, 2015 7:25 pm

mrwalker500 wrote:"Mr Toonga is sending me his sample, I believe shipping last week from WA, but not in hand with me yet. As soon as I receive it I'll send it off for quotation."
Send me a PM if you want to borrow mine. I have the xt6 backing plates too.
I would be keen to get hold of a plate to blank/ adapt the holes to fit ej calliper hangers.
Sorry there has been a delay as I have been busy turning 50.

hopefully early this week in the mail.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
mattw
Junior Member
Posts: 189
Joined: Fri Oct 07, 2005 10:00 am
Location: Adelaide

Post by mattw » Wed Oct 21, 2015 9:57 pm

henpecked wrote:I don't want to peeve too much, but do any of you think you could start a separate thread for this reasonably unrelated stuff - and delete your posts in this thread ?

or conduct your business through PM ?
Yeah, fair call. I suppose now days there aren't any admins or the usual forum police keeping an eye on conduct and keeping everyone in check.

User avatar
adstrac
Junior Member
Posts: 4
Joined: Tue Jul 09, 2013 1:56 pm
Location: Sydney, NSW

Post by adstrac » Sun Jan 21, 2018 4:14 pm

Hi Henpecked, old thread I know, but wondering if you still may have 2 pairs of the 4x140 to 5x100 adapters available? If so how much including postage to postal code 2795.

Thanks
adstrac

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Fri Feb 09, 2018 4:46 pm

adstrac wrote:Hi Henpecked, old thread I know, but wondering if you still may have 2 pairs of the 4x140 to 5x100 adapters available? If so how much including postage to postal code 2795.

Thanks
adstrac
a set on ebay

https://www.ebay.com.au/itm/Subaru-4WD- ... SwKIdactn4

Be quick

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

Post Reply

Return to “For Sale”