Complete Air/con set up for Brumby or any EA81

Proton mouse · Post by **Proton mouse** » Sat Sep 14, 2013 7:52 pm

SOLD SOLD SOLD
G'day folks,
Up for sale is a complete A/C system to suit a Brumby, sportswagon, sedan or coupe running an EA81. It is totally complete and ready to fit. I have kept all nuts and screws, pus labelled every wire as to where it was from, plus taken about a dozen pics to be emailed to the buyer, so as to make fitment as easy as possible.
Kit includes...Compressor on its bracket, condenser, evaporator, dryer, piping/hoses, relays for engine bay, relay under dash, complete wiring loom, shorter glove box insert, plus the idle up solenoid.
Came from a working vehicle which still had gas in it and the green fluoro dye(converted to R134a) only thing I would do is clean the fins of the evaporator while it is out (they are not bad though). All pipes, compressor etc were sealed immediately with tape upon opening, so as not to absorb moisture from the atmosphere.
I am in sunnybank on the sth side of Brisbane, inspection welcome.
Reply to post, pm or call/text 0404 186 738 but not before 10am please as I do late shifts.
Price is $400 the lot. SOLD SOLD SOLD
Cheers, John.

Silverbullet · Post by **Silverbullet** » Sat Sep 14, 2013 8:03 pm

Wow what a perfect set, don't suppose you're willing to freight it

If I lived anywhere near Brissy I'd have it in a second, someone will be getting a bargain.

Proton mouse · Post by **Proton mouse** » Sat Sep 14, 2013 9:46 pm

Mr Bullet!
I don't mind at all boxing it all up. I sent an A/c set up last year and a power steer set up a few months ago down to Vic. Cant remember the freight cost on the A/c but the P'steer was about $75. It all depends on the total weight and the boxed cubic volume.
Give me a call if you want it.
Cheers, John.

ozbrumby · Post by **ozbrumby** » Mon Sep 16, 2013 12:45 pm

Proton mouse wrote:Mr Bullet!
I don't mind at all boxing it all up. I sent an A/c set up last year and a power steer set up a few months ago down to Vic. Cant remember the freight cost on the A/c but the P'steer was about $75. It all depends on the total weight and the boxed cubic volume.
Give me a call if you want it.
Cheers, John.

I just got a complete setup sent from Port McQuarrie to Darwin for $130 which included the heavy duty radiator and twin fans
Busfreight or pack n send were same price....
4 days later ...hey presto.
half way thru fitting it up now.

dont spose you could send me the pics...??
[email protected]

Peter

Proton mouse · Post by **Proton mouse** » Mon Sep 16, 2013 1:59 pm

dont spose you could send me the pics...??

Yep no worries Peter. Will do later tonight when Im on my computer.
Cheers, John.

ozbrumby · Post by **ozbrumby** » Mon Sep 16, 2013 3:35 pm

Proton mouse wrote:Yep no worries Peter. Will do later tonight when Im on my computer.
Cheers, John.

Great
Thanx John

Silverbullet · Post by **Silverbullet** » Mon Sep 16, 2013 5:38 pm

ozbrumby wrote:I just got a complete setup sent from Port McQuarrie to Darwin for $130 which included the heavy duty radiator and twin fans
Busfreight or pack n send were same price....
4 days later ...hey presto.
half way thru fitting it up now.

dont spose you could send me the pics...??
[email protected]

Peter

Yeah so we found out, freight isn't as much as either of us thought

Big thanks to John for boxing it all up to send, really looking forward to that cool ride in the summer time

dfoyl · Post by **dfoyl** » Mon Sep 16, 2013 6:44 pm

If anyone needs in-situ photos I did this install 3 years back and can take 'after' shots.

steptoe · Post by **steptoe** » Mon Sep 16, 2013 6:55 pm

I like, Sam, worried about spending money last week on his crunching Brumby, this week shelling out for AC

Might have to drag out my AC bits and get them going. Summers are getting hotter, and now I have more power to drive the bloody thing - EA82 Y pipe !!

I guess the mouse needs to close this sale ad off then ??

Silverbullet · Post by **Silverbullet** » Mon Sep 16, 2013 8:05 pm

Hey, I don't mind dipping into the resto fund if the parts are actually going towards the resto

It's nicking bits off the project car and shelling out to keep the daily running I have a problem with