Gumtree sales

Got something to sell ? Put it in here ...
User avatar
JP147
Junior Member
Posts: 239
Joined: Tue Dec 03, 2013 5:01 pm
Location: Port Adelaide, SA

Post by JP147 » Wed Dec 09, 2015 9:10 pm

I saw a set of 13" Cheviots like those on a coupe at u pull it Gillman. I went to buy them but they wanted $40 each so I left them near the door. Maybe they are the same ones.
Image

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sun Dec 13, 2015 6:15 am

El_Freddo wrote:Scorpions anyone?

In vic too ;)
So anyone here pick these up?

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Proton mouse
Junior Member
Posts: 378
Joined: Mon Nov 06, 2006 11:35 pm
Location: Diagonally parked in a parallel universe

Post by Proton mouse » Mon Feb 08, 2016 12:09 am

Good cheap project...just needs a buff lol
Think he wants someone to pay him to clean up his yard....


http://www.gumtree.com.au/s-ad/bauple/c ... 1101803994

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Mon Feb 08, 2016 10:04 am

This brumby is on the Sunshine coast 5 SP RWD conversion

Has twin carbys :) no factory air cleaner though

http://www.gumtree.com.au/s-ad/gympie/c ... 1099791186

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Sat Feb 13, 2016 9:30 pm

Brumby project Near Bunbury WA (not mine) it belongs to Corax

http://www.gumtree.com.au/s-ad/eaton/ca ... 1101602578
Got a project car for sale. This brumby is powered by an EJ20tt out of a B4. The motor is currently out as the chassie rails need to be dressed up as they have only been rough cut at the moment. The motor is over at my mechanic friends house but if you are genuinly interested he can bring it over.

The ECU is a custom MINES ECU which was made for this particular motor.

The body is in extremely good condition with no dents whatsoever and an awesome paint job.

Being a brumby there is some light rust in the tray.

Seats and centre console have been used on other cars but I do have some racing seats that do bolt in if you want them. For extra coin of course.

Essentially this is a project car that I have been dragging around for years and I have finally accepted that I am never going to do anything with it so time to pass it on to someone else.

Car is currently registered but NOT for the mods.

I am open to negotiation but not to stupid offers.
Having seen this brumby if I had the money I would buy it and get it finished.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Sat Feb 13, 2016 9:34 pm

Anyone up for and RX Turbo sedan?

http://www.gumtree.com.au/s-ad/lesmurdi ... 1101376411
Rare 1985 rd turbo 1.8L turbo. Rego'd and running I've owned this for years and had lots of fun with it but I just don't use it anymore and it needs someone to give it some love and attention. Runs well but has a split in power steering hose. Wrx top mount intercooler but original parts are with it if you want to remove. 3" exhaust gives it that angry subi growl.boost gauge and rare 15" alloy wheels. Interior is ok comes with leather wrx momo steering wheel, drivers seat is ripped but car comes with a pair of gc8 wrx seats unfitted. Body is straight but has rust in rear rh quarter and clear coat is peeling on roof bonnet and boot. Great powerful little car for restoration project or rallycross/motorkhana use. I would keep it but just don't have time for it and need to work on other projects. Price is negotiable but I'm not in a hurry to sell so no silly lowball offers or requests to swap please as response may offend. This is a rare car for the right people......
NO IM NOT INTERESTED IN SWAPS so please don't ask!
I'm weeping at this one :(

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
dfoyl
Junior Member
Posts: 717
Joined: Mon Aug 28, 2006 12:13 pm
Location: Victoria eastern suburbs

Post by dfoyl » Sun Feb 14, 2016 5:43 pm

That RX would be a good restoration project, depending on how good the interior condition was. Removing the boost meter and Pug wheels would be the first place to start, and a fresh coat of paint. Getting pretty hard to find original RX's now.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.

User avatar
Tigger
Junior Member
Posts: 414
Joined: Wed Dec 28, 2005 10:00 am
Location: West Brisbane

Post by Tigger » Mon Feb 15, 2016 4:07 pm

I've never seen a blue RX Turbo before - I really like it!!

Hopefully it will go to a good home and to someone who will give it the love and attension it deserves!
ImageImageImage
2012 Subaru Forester - 2.0D Premium ~ 2002 Subaru Forester - Limited (Lifted)

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Thu Feb 18, 2016 10:01 am

A little bit of morning heartbreak for me :(

http://www.gumtree.com.au/s-ad/australi ... 1104546156

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Fri Feb 19, 2016 9:48 am

MY Wagon, needs some work but good for parts, might not take too much to restore her

http://www.gumtree.com.au/s-ad/smithfie ... ved_search
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings

User avatar
Proton mouse
Junior Member
Posts: 378
Joined: Mon Nov 06, 2006 11:35 pm
Location: Diagonally parked in a parallel universe

Post by Proton mouse » Fri Feb 19, 2016 10:39 am

Toonga, tell me that's not 'PJ' you are selling off so cheap???

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Fri Feb 19, 2016 11:02 am

Proton mouse wrote:Toonga, tell me that's not 'PJ' you are selling off so cheap???
Yep it sure is. I'm broke, I have 3 cars and PJ is the one I'm selling so I can keep the other two on the road. :(

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
Proton mouse
Junior Member
Posts: 378
Joined: Mon Nov 06, 2006 11:35 pm
Location: Diagonally parked in a parallel universe

Post by Proton mouse » Fri Feb 19, 2016 11:07 am

Oh bummer, sorry to hear that mate. Good luck with it all.
JB

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Sun Feb 21, 2016 3:51 pm

Proton mouse wrote:Oh bummer, sorry to hear that mate. Good luck with it all.
JB
Thanks had a couple of takers but I'm being honest about the condition of the car so ... no one has bought her yet

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Fri Mar 04, 2016 6:26 pm

TOONGA wrote:Thanks had a couple of takers but I'm being honest about the condition of the car so ... no one has bought her yet

TOONGA
I sold PJ today :(

So starts the collecting for my next project

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Fri Mar 04, 2016 7:24 pm

Awesome - obviously you got a price and a buyer you were happy with!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Fri Mar 04, 2016 9:41 pm

El_Freddo wrote:Awesome - obviously you got a price and a buyer you were happy with!

Cheers

Bennie
Yes and no, Yes a young guy from Augusta who is going to use PJ for beach fishing and not quite the price I was hoping for but I'm not broke now :).

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Sun Mar 06, 2016 7:40 am

reading other threads, you have another Brumby waiting in the wings - you'll be right Jules.

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Fri Mar 11, 2016 2:31 pm

Two brumby doors for sale (shameless plug)

http://www.gumtree.com.au/s-ad/australi ... 1106802053

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Tue Apr 12, 2016 10:04 am

Not mine ... :(

If you want a power steering kit this one comes with a licensed sedan

http://www.gumtree.com.au/s-ad/darlingt ... 1109333764

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

Post Reply

Return to “For Sale”