L series control arms, starters and alternator - Perth

Got something to sell ? Put it in here ...
Post Reply
User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

L series control arms, starters and alternator - Perth

Post by AndrewT » Mon Jul 07, 2008 1:58 pm

Item............................... 5spd dual range shifter linkage assembly

Description...................... It has the older style (1985) dual range lever

Condition........................... Sloppy, needs new bushes.

Location.......................... Perth NOR

Price................................ $10

Contact ............................ PM me
Image

Item............................... L series control arms and radius rods

Description...................... The bits people always bend when going offroad

Condition........................... None of them are bent. You would be best to put new bushes in but these are still usable.

Location.......................... Perth NOR

Price................................ Control arms $20 each, Radius rods $20 each

Contact ............................ PM me
Image

Item............................... 3 x L series starter motors, and a Liberty one on the far right too

Description...................... A useful electric motor to crank your engine over! The L series ones are to suit Manual. The liberty one is to suit Ej22 automatic.

Condition........................... L series ones are assumed working (have all come out of working cars but then sat for quite a while). Liberty one I'm very sure should work fine. Easy way is just swap it out when you come to my place, if it works great, if not try another one.

Location.......................... Perth NOR

Price................................ L series starter $20, Liberty starter $40

Contact ............................ PM me
Image

Item............................... L series EA82 alternator

Description...................... Came off one of my old carby motors

Condition........................... Was working when removed. Try it out, if it works great!

Location.......................... Perth NOR

Price................................ $20

Contact ............................ PM me
Image

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Mon Jul 07, 2008 10:19 pm

I could be interested in the L radius rods.

Dave
EJ conversion wiring harness cut downs available. Please PM or email (davem2000@hotmail.com) for details.

User avatar
Matatak
Senior Member
Posts: 2393
Joined: Fri May 04, 2007 8:06 pm
Location: Gnangara next to pines

Post by Matatak » Tue Jul 08, 2008 7:24 pm

SuBaRiNo wrote:I could be interested in the L radius rods.

Dave
Can i ask what for Subarino.

they are exactly the same length as the My's if your hoping for better castor.

or if you need spares then dont mind me.
Image
Wagon is no longer....:(

The Subaru Wacky Workshop
-All About the WA Boys :D

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Tue Jul 08, 2008 9:22 pm

Spares would be nice.... but the last i checked L series radius rods were about 1mm thicker in diameter. It's also worth noting that RX ones are even thicker again.

Dave
EJ conversion wiring harness cut downs available. Please PM or email (davem2000@hotmail.com) for details.

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Tue Jul 08, 2008 10:23 pm

Yes, you can't have my nice thick RX ones :)

Dave, I need to go to my place during the day tomorrow and your place is on the way back. I could arrange for two to magically appear on your doorstep no trouble at all. Let me know.

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Fri Jul 11, 2008 2:57 pm

bump bump bump bump

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Sat Jul 12, 2008 1:23 pm

I only just read your post then Andrew. LOL. No magic at this end.

Dave
EJ conversion wiring harness cut downs available. Please PM or email (davem2000@hotmail.com) for details.

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Sat Jul 12, 2008 3:31 pm

Yer wasn't sure if you wanted me to or not so held off.
I'll be at my place tomorrow, drop me a msg to make sure and u can grab them if you want.

Post Reply

Return to “For Sale”