Brumby EG33 Crossbred kit etc

Post Reply
steverisingsun
Member
Posts: 4
Joined: Wed May 29, 2019 2:02 pm

Brumby EG33 Crossbred kit etc

Post by steverisingsun » Wed May 29, 2019 8:09 pm

Item............................... Brumby flat six

Description...................... Please see below

Condition..........................Please see below

Location ..........................Two Wells South Australia

Price................................$3000

Contact ............................ 0407728283

Hi Guys, Steve here, I have not been on the forum for years.
I had the Rising Sun at Gepps Cross [S.A.], used to do a lot of Subi's.
I have a Brumby to sell, a bit unusual;
It was put together by one of my son a few years back, we had a family loss and it has sat since.
It is fitted up with an EG33 SVX engine 184Kw's, using factory management. Low K Jap import.
The auto trans is the 4 speed auto, SXV unit, the SVX ran a beefed up unit with a planetary gear set for the AWD, with a lock up clutch.
We took out the 3.7 ratios, I think we put in 4.11 diffs, I can check, not sure if it is an LSD rear, will check.
It has the Crossbreed conversion, so it is running Liberty brakes and wheels, fitted with a 2" lift kit [does not use strut top extensions]
Power steer
Exhaust was all done.
Can be register in S.A. straight away BUT, it is not engineered.,
Body is not bad at all it was repainted but the paint has gone off. General condition is fair, value is in the parts.
Radiator is mounted behind the cab, twin fans, mounted on a roll bar set up.
It goes like stink, very quick!
Needs cleaning up, great project of for parts.
Was driven on the road regularly until mothballed.
Will post photos tomorrow.
$3000 [Cost over $10k when we did it all. plus car]
Can arrange delivery or drop to your depot.
Steve
0407728283

User avatar
AndrewT
Big Boost Talkalot
Posts: 4776
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Re: Brumby EG33 Crossbred kit etc

Post by AndrewT » Thu May 30, 2019 12:37 am

wow sounds awesome Steve. I'm not in the market but would still love to see photos!

User avatar
Phizinza
Gettin Hot Talkin'
Posts: 1442
Joined: Mon Oct 10, 2005 10:00 am
Location: SA
Contact:

Re: Brumby EG33 Crossbred kit etc

Post by Phizinza » Thu May 30, 2019 8:55 am

I saw this Brumby mid build, looked like a nice clean Brumby then and I'm sure it ended up as a clean install as well. Did the radiators end up in the tray?

User avatar
steptoe
AUSUBARU MASTER
Posts: 11572
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Re: Brumby EG33 Crossbred kit etc

Post by steptoe » Thu May 30, 2019 8:59 am

Oh jeepers...want want want

steverisingsun
Member
Posts: 4
Joined: Wed May 29, 2019 2:02 pm

Re: Brumby EG33 Crossbred kit etc

Post by steverisingsun » Thu May 30, 2019 12:28 pm

Phizinza wrote:
Thu May 30, 2019 8:55 am
I saw this Brumby mid build, looked like a nice clean Brumby then and I'm sure it ended up as a clean install as well. Did the radiators end up in the tray?
It has sat in the weather for a long time so it is no as nice as it was, I am only after parts money, but it is a good going concern!
Radiators are mounted on a roll bar set up, behind the cab.

steverisingsun
Member
Posts: 4
Joined: Wed May 29, 2019 2:02 pm

Re: Brumby EG33 Crossbred kit etc

Post by steverisingsun » Thu May 30, 2019 12:43 pm

steverisingsun wrote:
Thu May 30, 2019 12:28 pm
Phizinza wrote:
Thu May 30, 2019 8:55 am
I saw this Brumby mid build, looked like a nice clean Brumby then and I'm sure it ended up as a clean install as well. Did the radiators end up in the tray?
It has sat in the weather for a long time so it is no as nice as it was, I am only after parts money, but it is a good going concern!
Radiators are mounted on a roll bar set up, behind the cab.
How are you mate, long time no hear!

User avatar
El_Freddo
AUSUBARU MASTER
Posts: 11910
Joined: Tue Oct 04, 2005 10:00 am
Location: Benders (aka Bendigo) Vic

Re: Brumby EG33 Crossbred kit etc

Post by El_Freddo » Thu May 30, 2019 12:59 pm

Geez, outcome all the old members! Awesome!!

Best of luck with the sale Steve, I’m sure you’ll find a good home for the beast!

Hopefully we’ll see it on here again.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

steverisingsun
Member
Posts: 4
Joined: Wed May 29, 2019 2:02 pm

Re: Brumby EG33 Crossbred kit etc

Post by steverisingsun » Thu May 30, 2019 5:54 pm

El_Freddo wrote:
Thu May 30, 2019 12:59 pm
Geez, outcome all the old members! Awesome!!

Best of luck with the sale Steve, I’m sure you’ll find a good home for the beast!

Hopefully we’ll see it on here again.

Cheers

Bennie
Thanks mate, it has been awhile!

User avatar
mattw
Junior Member
Posts: 189
Joined: Fri Oct 07, 2005 10:00 am
Location: Adelaide

Re: Brumby EG33 Crossbred kit etc

Post by mattw » Thu May 30, 2019 9:23 pm

Wow, the beast lives!
Steve honoured me with a drive of it, or it's twin (wasn't there two?) one rainy day many years ago, he was thinking of selling it at the time. I nearly convinced my Dad it was the perfect farm ute that day.
🤔
Maybe this time....

Post Reply