FS SA: Wrecking L series MPFI wagon + EA82T + parts

mattw · Post by **mattw** » Tue Feb 02, 2016 10:57 pm

El_Freddo wrote:Lib waic gone or still up for grabs?

Cheers

Bennie

Sorry mate,
Hopeless, bloody hopeless.
Yes WAIC is still in my collection. If you really want it I can stick it in an Auspost satchel. Or it'll sit in my shed awaiting a turbo project......

Sent from my SM-G900I using Tapatalk

mattw · Post by **mattw** » Tue Feb 02, 2016 11:00 pm

[quote="vk3fjmh"]

Peter,
I'm seeing a lot of you're posts chasing parts and nothing of your project. What are you working on my friend?

mattw · Post by **mattw** » Tue Feb 02, 2016 11:06 pm

mattw wrote:
vk3fjmh wrote:
Peter,
I'm seeing a lot of you're posts chasing parts and nothing of your project. What are you working on my friend?

Sorry, meant to say James.
Tapatalk app won't let me edit my post.

RubysueEA82 · Post by **RubysueEA82** » Wed Feb 03, 2016 3:49 pm

Hey Matt,

Let me know if you want the scrap hauled away... I'm trying to cut down on projects but China is a poor fate for good bits. I'm not authorised to spend heaps on the missus wagon but I'll certainly give you some beer/money and make the stuff disappear to a good home.

Cheers

Anthony

mattw · Post by **mattw** » Wed Feb 03, 2016 5:00 pm

well, in addition to the EA82T, loom spaghetti etc, there is several headlights and tail lights.
I'd think the engine is worth money, but I could be wrong....

vk3fjmh · Post by **vk3fjmh** » Wed Feb 03, 2016 6:48 pm

hi ok do you have these
5 * hi do you have any of these
parts from 1986 -1990 subaru l series rx turbo or vortex turbo

vortex
dash surround
spider intake manifold
rear spoiler
rear disc brakes
rear sway bar
rear door spats

l series
efi turbo 3 plug loom with knockbox
flapper air flow meter
3 plug dissy with vacume advance
front fender crome side lights
rear spoiler
rear sway bar
rear lsd
rear spoiler
checkerd inside door panels
6 gauge instrument cluster with surround
ea82t engine
0407 031 231
please let me know what you have
regards james

mattw · Post by **mattw** » Wed Feb 03, 2016 8:11 pm

There is not a lot left. The main bits of interest were sold, remaining front and rear suspension and engine removed and a sabre saw put through the body reducing it to manageable pieces. The cross sectioned dash was really interesting, a good learning aid for my boy.

Here is a last gasp of what I have left:
EA82t MPFI engine
EA82 4 plug ECU
EA82T 4 plug ECU
front suspension and hubs
Rear suspension, diff and x member
L series head lights, tail lights
Various new top and/or bottom radiator hoses
Pile of EA82 engine loom back to and including fuse box
Ally roo bar

Some is located in the southern suburbs, some is 40km further out of town. You'll need to pick up from my place for anything that won't fit in a post pack. I'f someone is serious about crating an engine interstate we'll have to talk about it.

James,
Rather than repeatedly posting your list and expecting people to call you, how about you look at my list and if you want something, send me a PM and make an offer.

Now, where did that WAIC get to...............

Cheers,
Matt

Sent from my SM-G900I using Tapatalk

vk3fjmh · Post by **vk3fjmh** » Wed Feb 03, 2016 8:36 pm

hi
ok ea82t engine $250
wiring loom $40
what ratio is the diff
boost gauge. $10
do you still have the turbo cluster

mattw · Post by **mattw** » Wed Feb 03, 2016 9:00 pm

vk3fjmh wrote:hi
ok ea82t engine $250
wiring loom $40
what ratio is the diff
boost gauge. $10
do you still have the turbo cluster

The diff is a std L series not an lsd, don't know what ratio that is but AFAIK it's the same as a turbo.
The gauge cluster is gone, wasn't a turbo cluster.

Ok, so I'm in Adelaide and these won't fit in a post pack.......
I'll PM you my email address and we'll go from there.
Matt

wagonist · Post by **wagonist** » Wed Feb 03, 2016 11:46 pm

Does the turbo 4 pin ecu work? I've 2 dud ones here which don't allow my fuel pump to work.
Can you list the part number so I can check for compatibility please?

mattw · Post by **mattw** » Fri Feb 05, 2016 12:06 am

wagonist wrote:Does the turbo 4 pin ecu work? I've 2 dud ones here which don't allow my fuel pump to work.
Can you list the part number so I can check for compatibility please?

Worked fine last time I used it, car has been off the road for 7 years or so. I have to find it first, my Dad is doing a retirement shed clean out and it sounds like its been misplaced. I have the non turbo one here, the other one I'm beginning to be concerned about. This is a guy who has a history of scrapping engines and boxes within weeks of me buying them, so who knows......

I'll advise either way.

mattw · Post by **mattw** » Fri Feb 05, 2016 12:09 am

mattw wrote:well, in addition to the EA82T, loom spaghetti etc, there is several headlights and tail lights.
I'd think the engine is worth money, but I could be wrong....

Oh and a pair of good velour Touring Wagon seats that were going to go into the Brumby. I have liberty seats for that now, so they are free to the first to take them.

wagonist · Post by **wagonist** » Fri Feb 05, 2016 7:22 am

colour?

mattw · Post by **mattw** » Fri Feb 05, 2016 11:05 am

Grey

Sent from my SM-G900I using Tapatalk

schultzie · Post by **schultzie** » Sat Feb 06, 2016 7:09 am

Did Bennie grab the waic? If not I'll buy it.

And might look at freight options for the ea82t, my number is 0425745783, send us a txt to discuss further

YouTube · Post by **El_Freddo** » Sat Feb 06, 2016 7:32 am

Nah Schultzie, timing has not been my friend

Go for it as I'll hoard it for a project that'll probably never happen...

Cheers

Bennie

mattw · Post by **mattw** » Mon Feb 08, 2016 8:03 am

Happy the two of you worked it out ☺. Shultzie, I'll let you know if current discussions for the engine fall through. I'll PM you my email for the WAIC

Sent from my SM-G900I using Tapatalk

schultzie · Post by **schultzie** » Mon Feb 08, 2016 11:55 am

Benny will not ever use it!! Na for lyf!!

mattw · Post by **mattw** » Tue Mar 08, 2016 5:29 pm

Engine and loom are sold. WAIC on hold. Still have the roo bar, various lights, front seats, front suspension and various parts. Last chance bargain hunters.....

Sent from my SM-G900I using Tapatalk

YouTube · Post by **El_Freddo** » Tue Mar 08, 2016 7:55 pm

schultzie wrote:Benny will not ever use it!! Na for lyf!!

Keep thinking that mate... Already got a WAIC if you catch my drift...

Cheers

Bennie