Page 1 of 1
Bonnet Scoops 4 L series
Posted: Thu Dec 29, 2005 1:24 pm
by BlackMale
Now i am feeling a lil dirty even suggesting not purchasing a Subaru part however i have been thinking that the ea82t is WELL overdue for a TMIC and therefore will require some assistance from a bonnet scoop, hence my poll question...
Note:
1) The scoop WILL need to fit between the "ribs" on the bonnet.
2) Sorry but this does not include pocket power - no offence intended.
Posted: Thu Dec 29, 2005 1:41 pm
by BaronVonChickenPants
I was looking into scoops when I first got my weber for some sort of cold air intake, origanally I was looking at the hornet scoops till I realised how big the actually are (almost as long as the whole bonnet) then I spotted a nice little one from SSV (sydney special vehicles) for about $70, just after that I noticed the patrols with an almost identical scoop, I figure you should be able to get the patrol scoop fairly cheaply and I reckon it will look pretty good on the suby.
Jordan.
Posted: Thu Dec 29, 2005 2:46 pm
by MUDRAT
Without going into the technicalities of laminar flow etc etc . . . for airflow through the scoop at speed you're best off with a GT/B4 Liberty style scoop. Not only are they understated and classy, but they work well. Otherwise MY01+ STi scoop would be the go.
The early model WRX scoops actually flow better if you turned it around to face backwards at 100km/h! I think the Patrol scoops are in the same class, but Lightening Silver RX might be able to get you a worthwhile deal.
Posted: Thu Dec 29, 2005 3:33 pm
by stinky
I've got a patrol scoop on the mighty brumby, I reckon they look sweet on the MY / L series cars. Airflow wise, I have no idea

Posted: Thu Dec 29, 2005 6:23 pm
by BlackMale
Muddy i was trying aviod the whole airflow debate as i do not have a drag car... however agree 100% that its critical and even a small gains will be of benifit blar blar blar...
As for the GT scoops they will be massively expencive and you require massive modification to get the things to fit an L bonnet - if they were easier i would have gone that option (1 for the air flow and 2 for the sleeper factor - not that the 82t has heaps of that).
As for the Lightening Silver RX getting me something i might contact him.
Stinky i have only seen 1 L series with a GU style scoop, i will try and havea look on your profile or something for a pic of yours.
I suppose the reason i am thinking about a GU style is that it will require no mods to fit inbetween the ribs on the bonnet.
Thanks
Posted: Thu Dec 29, 2005 6:32 pm
by Craigus
Aftermarket fibreglass one here:
We're using a TMIC from a WRX:

Posted: Thu Dec 29, 2005 6:47 pm
by MUDRAT
*just to clarify* I meant air flow to the 'cooler, not how it affects the aerodynamics of the car.
Posted: Thu Dec 29, 2005 6:48 pm
by Outback bloke
Hey Craigus, nice looking car in the background there.

Posted: Thu Dec 29, 2005 9:51 pm
by Tim82
i've got a cut down wrx scoop to fit on an l series sitting in a box at home, i could be persuaded to let it go, it's not much use sitting inside
its even red, it's the one off of sksuba's old rx if you can find a picture of that.
Cheers Tim
Posted: Fri Dec 30, 2005 9:43 am
by AndrewT
Talk to Oversteer....I know he has just reverted back to a water/air intercooler on his L series and is hunting for a non-modified standard bonnet to replace it.
His is a huge STI WRX top-mount.....might be abit over the top for you but should be effective

This is it...
http://members.iinet.net.au/~zrinski/scoop1.jpg
http://members.iinet.net.au/~zrinski/scoop2.jpg
http://members.iinet.net.au/~zrinski/scoop3.jpg
PS - I have no idea if he is actually intending to sell it.
Posted: Fri Dec 30, 2005 10:34 am
by BlackMale
Tim82 wrote:i've got a cut down wrx scoop to fit on an l series sitting in a box at home, i could be persuaded to let it go, it's not much use sitting inside
its even red, it's the one off of sksuba's old rx if you can find a picture of that.
Cheers Tim
I could be interested

u wana send me a PM... and i think that i have a pic of sksuba's car somewhere (this is the red 1 that got totaled, yer - sorry to bring it up)
Oh and AndrewT i need to contact OS so I'll have a yarn with him about it - thanks.
Posted: Fri Dec 30, 2005 8:28 pm
by Captain Obvious
mark, tuff rx put a gu scoop on his looks weet fits the cars well if i ever have to redo mine thats what i will go with.
Posted: Fri Dec 30, 2005 9:52 pm
by Suby Wan Kenobi
Without doing any major mods to the bonnet and for the simple way they fit i would use the Patrol scoop again if i out one on another l, they look nice and fit like they where made for the bonnet . i dont have any readliy available pics of my green wagon with one on it but there was the guy who brought it had a post in the forsale section with pics
Posted: Fri Dec 30, 2005 11:44 pm
by WombatRacing
just to throw in a different one what about the scoop of the Hyundai Terracan or what ever its called looks abit more agessive than the Patrol one.
Posted: Sat Dec 31, 2005 8:53 am
by Wilbur
To you subie type people that GU scoops are $105 inc freight (australia only).
Posted: Mon Jan 02, 2006 3:44 pm
by Tim82
email sent Jaffa

Posted: Tue Jan 03, 2006 6:25 pm
by BlackMale
Thanks Tim, you have my reply.