2.0l sequential twin turbo vac hose diograms

drivelo · Post by **drivelo** » Mon Jun 18, 2012 8:37 pm

hi i have a 99 liberty with a 2.0l twin turbo and need to find the diograms for the vac hoses, i am sure they are not set up right but this info is harder to find than rocking horse shit....can anyone help me

thunder039 · Post by **thunder039** » Mon Jun 18, 2012 8:45 pm

i think there is a forum called rslibertyclub.org might be were the info is

drivelo · Post by **drivelo** » Tue Jun 19, 2012 12:09 am

thanx heaps i'll check it out

Gannon · Post by **Gannon** » Tue Jun 19, 2012 6:23 am

This is for a 97 (Gen2) GT-B, should be fairly similar

This is a Gen3 one

Dunno what this one is, but it may be of help

Gannon · Post by **Gannon** » Tue Jun 19, 2012 6:28 am

If you are still stuck, I can have a flick through the FSM tonight and find a better diagram

sven '2' · Post by **sven '2'** » Tue Jun 19, 2012 11:52 pm

Years ago working on a Cordia, had the same issues - could not for the life of me work out what went where. Ended up seeing the same model car in a carpark, waited until the owner came back, and asked if I could look under the hood. She was very obliging, and it saved me a heap of guess work.

Off RSLC, I'm sure you will someone who could assist.

Gannon · Post by **Gannon** » Wed Jun 20, 2012 6:18 am

Also if you replace any hoses, there are little brass restrictor pills in some of them and if they are misplaced, will cause you all sorts of drama