Nannadan the time traveller

Show off your Subaru to other members. Tell us a bit about it. What mods you have done or have planned for the near future.
User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Sat Oct 07, 2017 6:09 pm

El_Freddo wrote:Lazy! The trick is to resize each image before you upload to the host site. Works a treat for me ;)

Fair effort on the swap. What did you do with the different thermostat housing position and hose work to the radiator? Only asking in the event that you have factory PS fitted.

Cheers

Bennie
Suppose so but if you click on them you get heaps of detail. :)

No power steering, so I just used a hose that is very similar to the L top hose, as I didn't have one.

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
Nubaru
Junior Member
Posts: 165
Joined: Fri Jan 10, 2014 8:02 am
Location: within the girth

Post by Nubaru » Sat Apr 28, 2018 10:13 pm

That sticker on the door is in amazing condition for its age. I was looking at a door trim just today that had same sticker, or remnants of, and even now reading yours, is as clear as south Australian mud ? as to what one is meant to be doing to observe their instruction.

Engine and trans swap - another auto or fwd5 ?

Reply some time in next 18 months is OK :)
member since 10january2014 #6191

User avatar
TOONGA
Elder Member
Posts: 5335
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Wed May 30, 2018 11:46 am

LOL Nubaru sorry I missed this. I put in a worked EA81 engine a 5 speed from a wrecked hard top and an EA82 manifold and NOS carby and air cleaner.

some pictures https://imgur.com/a/PoWur


TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

Post Reply

Return to “My Subi”