Gen 3 H6 Lifted Outback

taza · Post by **taza** » Thu Oct 20, 2011 5:40 pm

+1 for one of my mates with the same car, colour and all (new paint job due to hail damage 6months ago) except already a manual with an EJ25.

wombataaron wrote:Hey i have the exact same car even in the same colour and i plan to do exactly the same mods as you minus the engine conversion and dccd thingy, i was wondering where did you source your 3" strut top lift from? Ive tried and can't find anyone selling any, also have you had any problems resulting from lifting the car that much since its been done?

Try Crossbred Performance. They should be able to help you out.
http://crossbredperformance.com/

Taza

wombataaron · Post by **wombataaron** » Thu Oct 20, 2011 5:43 pm

I'm talking to crossbred now, hopefully i can get some lift:D

Davidov · Post by **Davidov** » Thu Oct 20, 2011 9:19 pm

wombataaron wrote:Hey i have the exact same car even in the same colour and i plan to do exactly the same mods as you minus the engine conversion and dccd thingy, i was wondering where did you source your 3" strut top lift from? Ive tried and can't find anyone selling any, also have you had any problems resulting from lifting the car that much since its been done?

Same here too! (Besides only having an EJ25 but eh)

Already Have subaextreme bullbar and SG in the post on the way. Then spoots to come, 29" AT/s planned and hopefully L series low range eventually.

wombataaron · Post by **wombataaron** » Thu Oct 27, 2011 6:39 pm

My bar and sumpguard are on the way, 3 week wait but:( what size tyre is that in normal terms:p

legacytt · Post by **legacytt** » Mon Oct 31, 2011 7:53 pm

The lift was from Dave (SubiwanKenobi) via Ausubaru here. I don't think Crossbread do a lift for Gen 3. It is 2 inch lift with 3 inch strut tops. I wouldn't bother with just a strut lift, best to do the job properly. I haven't had any dramas with the car at all. The rear LSD was binding up so added some Penrite LSD additive and all works fine now. Have had it on quite a few varied terrains including very deep snow where I was glad for the locked centre as it was struggling for traction at times.

hydrowill · Post by **hydrowill** » Thu Apr 03, 2014 5:56 pm

Two and a half years on how is this car going?

legacytt · Post by **legacytt** » Sat Apr 05, 2014 7:11 pm

Has been returned to standard and sold. All the good bits are now in a Gen 1 Legacy GT. Will have a few pics of this one up soon.

hydrowill · Post by **hydrowill** » Mon Apr 07, 2014 6:55 pm

Cool, what made you change cars?

YouTube · Post by **El_Freddo** » Fri Jun 27, 2014 6:36 pm

legacytt wrote:Has been returned to standard and sold. All the good bits are now in a Gen 1 Legacy GT. Will have a few pics of this one up soon.

Have you got these pics up already in a new thread? Could you post a link to the thread?

Shame it's been sold on, looked like an awesome setup on a good looking vehicle - reminds me of my L series...

Cheers

Bennie

legacytt · Post by **legacytt** » Thu Jul 03, 2014 9:47 am

Will get some pics sorted soon, was waiting to get the car looking more complete but have just been driving it. Due to a slashed tyre have miss matched rims at the moment.

YouTube · Post by **El_Freddo** » Sat Jul 05, 2014 10:28 pm

Link to new ride

Hope you don't mind Legacytt!

Cheers

Bennie

The ALL NEW AUSubaru.com.au Forums

Gen 3 H6 Lifted Outback

LIft

H6

Gt Legacy