Proud new owner of an RX

Show off your Subaru to other members. Tell us a bit about it. What mods you have done or have planned for the near future.
User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Sun Apr 22, 2012 8:13 pm

Why does the writing highlight blue and underline, like a link, even though there is no link associated with the text.

I havent decided if I will lower it yet, maybe a little, but not much.

Id say it is the IACV because I have code 24, which relates to the idle solenoid device.

Ive decided on 2 x 10" fans because they will fit better. I have one genuine 10" Davies Craig and a former forum member said he will donate a cheapy 10" fan so it will be interesting to compare them.
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
Silverbullet
Senior Member
Posts: 2858
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Sun Apr 22, 2012 8:23 pm

That linky thing happens when you put any text below a video for some reason.
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sun Apr 22, 2012 10:40 pm

And since some update I've not been able to click that link and have it show me the video... It's frustrating!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Sun Apr 29, 2012 9:16 pm

Just an update of pics of what Ive done recently in no particular order

RX as it stands at the moment.
1985 RX turbo, genuine BROBE vin
1995 WRX engine and 1992 Liberty dual range gearbox with a VLSD to go in the rear.
Crossbred brake kit with WRX front and rear discs
RS Liberty Radiator on custom bottom radiator support

It runs and drives but still needs tidying up body wise for inspection
The idle problem ended up being a tight throttle cable
I still have to install 2 x 10" thermo fans
I have a vacuum articulator from the centre diff lock of a Vortex turbo Im gonna use to shift between Hi and Lo range

Image

Image

RS ecu mounted in L series mounts
Image

Joined top hose until I find a proper replacement. And by the way to those who doubted me, my repaired radiator doesn't leak!
Image

Engine bay, I will be going with a WAIC soon
Image

TD04L turbo and custom recirc BOV and intake pipe setup
Image

Stealthy boost gauge, I wouldnt mind throwing a later dash cluster that has volts and oil pressure
Image
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Sun Apr 29, 2012 9:17 pm

Crossbred handbrake from a Mitsu Magna
Image

Handbrake cables pass under rear seat instead of through tailshaft tunnel
Image

Handbrake cables coming out under rear seat
Image

070 Bosch fuel pump and pre-filter to stop gunk from in the tank causing issues
Image

Crossbred rear backing plate
Image

The exhaust at the moment is just a 95 STI dump, oh my it sounds good
Image
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Sun Apr 29, 2012 10:14 pm

I'm excited :D for ya Gannon

User avatar
87rxturbo
Junior Member
Posts: 84
Joined: Sat Jan 01, 2011 8:14 pm
Location: SA

Post by 87rxturbo » Mon Apr 30, 2012 8:34 pm

Should go alright now! Be able to pull up in a hurry too,no more '82 dole drums and lack of wheel choice, bet it will suprise a few unsuspecting victims when the lights go green.

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Mon Apr 30, 2012 9:17 pm

Looking good mate!

And I'm glad to hear about the radiator - truly I am! I hope it goes the distance for you.

I'll be keen to see how the pre-pump filter will go, I remember being told at some point that a pre pump filter can create more issues than it solves - there's a little mesh filter in the pump's inlet that will catch anything that will do damage to the pump, what gets past will be caught by the fuel filter in the engine bay before it gets to the engine...

So straight though exhaust it is then??

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Mon Apr 30, 2012 10:30 pm

The filter is really only temporary, I just wanted to see how much crap was coming out of the tank since it has sat dry for 4 years. The exhaust will be mostly factory EJ exhaust parts, I havent quite decided what I'll use yet.

I took it up the road for a quick drive tonight when nobody was around. Its crazy! It needs a front wheel alignment and some better tyres, these have gone kinda hard and have very little grip.

I'll get a video soon
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Wed May 02, 2012 11:53 pm

Nice, not sure bout that exhaust though haha ;)
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:

'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Thu May 03, 2012 8:42 pm

Email that video clip so as not to reach youtube Currant Affair status :D

Wondering too, if that plastic filter will suck its chops in,maybe a metal filter of 1/2" ??

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Thu May 03, 2012 9:45 pm

At the time, I couldnt get a 1/2 inch filter, but the restriction issue did cross my mind.

As for a video, I'll just state that it was taken on a private road, or I simply wont exceed the speed limit
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
MTB92
Junior Member
Posts: 204
Joined: Thu May 12, 2011 10:58 pm
Location: Koongamia WA

Post by MTB92 » Thu May 03, 2012 10:22 pm

not meaning to completely change the thread or anything, but would having a filter pre-pump actually cause any issues?

I kept the l series one (new filter, but old position) when i did the EJ on my L series, more based on what was there than any particular decision that i needed one. so i have filter, then fuel pump, then 2nd filter (ej filter) near the motor. any chance that could cause issues? i guess the best way to find out is to rip it out and try :rolleyes:
(it doesn't feel slow at all, but being the only ej 22 L i have been in, i dont have much to compare it to)

Awesome project you have going on there Gannon :cool: cant help but think "i want" :D
cant wait to see it on the road!

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Sun May 06, 2012 10:34 pm

Here is a video we took tonight
http://www.youtube.com/watch?v=JIkeH3uZis0

As you can see we used a torch to watch the boost gauge because I haven't rigged up the light
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Mon May 07, 2012 8:29 am

13 seconds ?? YOU TEASE !!

User avatar
Alex
Elder Member
Posts: 5405
Joined: Wed Nov 23, 2005 10:00 am
Location: Perth
Contact:

Post by Alex » Mon May 07, 2012 8:44 am

Far out I miss that...

Sent from my HTC Velocity 4G using Tapatalk 2
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.

previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Mon May 07, 2012 4:36 pm

Yeah I know it was a quick video, but I just wanted to see if my wheel alignment worked and couldnt help bringing on the boost.

Speaking of, it appears that it was pulling between 8 and 12psi, but factory boost pressure is 11psi. My boost line restrictor might be too small 0.9mm and not letting enough bleed air out.

But other things take priority. My PS tank is leaking somehow so that will have to be fixed as will the reverse lights and my radiator fans
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
Gannon
Senior Member
Posts: 4580
Joined: Sat Nov 05, 2005 10:00 am
Location: Bowraville, Mid Nth Coast, NSW

Post by Gannon » Fri May 25, 2012 6:39 pm

Snagged myself an L series digital radio for $15
Image

Interestingly, it has a 13pin din socket in the rear the exact same as the Clarion in my Outback does that is used an an aux input and allows me to hook up an MP3 player and play through the speakers
Image

I just need some speakers for the doors now
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------

User avatar
El_Freddo
Master Member
Posts: 12487
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sat May 26, 2012 12:38 am

Gannon wrote:Snagged myself an L series digital radio for $15
Image
Oooh! Nice find mate!

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
Venom
General Member
Posts: 1044
Joined: Sun Feb 03, 2008 10:04 am
Location: Ballarat

Post by Venom » Sat May 26, 2012 7:04 am

Cool radio, haven't seen one of those.
[SIGPIC][/SIGPIC]

Post Reply

Return to “My Subi”