![Image](https://i.postimg.cc/kMQYrn4L/20190825-172008.jpg)
![Image](https://i.postimg.cc/1t6C3SKn/20190903-181206.jpg)
![Image](https://i.postimg.cc/8cmZLb9T/20190903-181216.jpg)
![Image](https://i.postimg.cc/J0LTyFTT/20190903-181517.jpg)
![Image](https://i.postimg.cc/C1ftnkwK/20190903-181524.jpg)
After the car comes back home going to get the rest of the engine tuned up, replace all the seals and O rings, etc... then put back in and hopefully before the end of the year have it back on the road.
The engine and transmission will fit with little modification to the engine bay. The biggest problem will be closing the bonnet as the 3.6 is taller than the EA82 I had the same problem with putting an EJ22 into my vortex I ended up using a 2 inch drop on the crossmember to get the alternator to clear the bonnet.Johnny T wrote: ↑Mon Oct 21, 2019 4:47 amHi everyone,
Just a quick update, I have the opportunity to get a 3.6ltr R engine, auto, loom etc... and would like to know if this will fit into the car (clearly there will need some custom work for the engine to bolt in, but just need to know if it is possible for it to fit with the auto and such).