the engine is a stocko EA81, but might do a little bit to it to bring out a few more ponys:
advance the timing
upgrade the plugs, leads, dizzy points, and coil
better airfilter setup?
exhaust from cat back
stocko 4speed, done the bushes in the shifter.. but still feels loose and 8ball gearball haha
bullbar from L series (thinking of swapping for a brumby bullbar)
scoop from GT Forrester
Sidesteps
14" sunnys with big rubber
future mods:
rollbar with spotties
EJ conversion when EA dies
body lift if have any dramas with clearance
upgrade headlights to aftermarket
powersteering
its been a project that myself and a few mates have been working on the past few weekends
we have just finished painting the shell, roof/rear and bonnet.





 . Got a close up shot of the fit of the Foz nostril ?
. Got a close up shot of the fit of the Foz nostril ? ) altho i'm going to have to elongate the holes to pull the bar up 15mm so there is no gap. and it sits a little wide.. but will see how it looks when its all finished. going to have to put them rubber flares on to widen the car to match the bar
) altho i'm going to have to elongate the holes to pull the bar up 15mm so there is no gap. and it sits a little wide.. but will see how it looks when its all finished. going to have to put them rubber flares on to widen the car to match the bar 














 ,  taken all the slop out of the shifter and modified it to suit the lift, new longer brakelines, new longer rear shocks, racing steeringwheel, twin bucketseats.
,  taken all the slop out of the shifter and modified it to suit the lift, new longer brakelines, new longer rear shocks, racing steeringwheel, twin bucketseats.




