Page 4 of 5
Posted: Wed Jul 08, 2015 2:04 pm
by mattw
These are at U-Pull-It Lonsdale right now. 14x6
Wheels
Posted: Wed Jul 08, 2015 5:42 pm
by legacytt
They are the Performance Marquee, should have an alloy disc centre cap to cover the wheel nuts.
Posted: Wed Jul 08, 2015 7:11 pm
by mattw
legacytt wrote:They are the Performance Marquee, should have an alloy disc centre cap to cover the wheel nuts.
Yep. The caps are all there, in the boot.
Posted: Wed Jul 08, 2015 8:51 pm
by henpecked
mattw wrote:Yep. The caps are all there, in the boot.
Sorry - they are there no longer
got in and out just before closing time today.
Posted: Thu Jul 09, 2015 8:29 am
by mattw
henpecked wrote:Sorry - they are there no longer
got in and out just before closing time today.
Glad they went to one of us.
Posted: Sat Jul 25, 2015 9:54 am
by steptoe
Think these were by Aunger - Turbines 13 x 6 4.7kg
centre machined to take the metal centre caps by Subaru
Like ...
Posted: Sun Jul 26, 2015 9:25 pm
by Bantum
Do you know what the offset is for these Steptoe ?
Cheers, Bantum ...
Posted: Sun Jul 26, 2015 11:04 pm
by steptoe
well, they came on an L Series and were alright on MY too. I can measure up ....
jellybeans not for sale
Posted: Mon Jul 27, 2015 5:15 pm
by henpecked
My mate approached the owner and neither the wheels not the car are for sale.
So thats that
Posted: Mon Jul 27, 2015 5:34 pm
by steptoe
aren't they just screaming out for some Purple Polish and some TLC !!
Posted: Sat Sep 05, 2015 10:48 am
by Cliff R
I really wish I wasn't so time poor, I might be able to keep up with things.
Last night was my first time near the forum for months.
Not sure if I missed this in this discussion but.
Focusing on factory steel rims and Subaru supplied (white) Sunnies (13" 4 x 140 stud)
1. is there a difference in offset between the early 80's Brumby rims (steel and sunnies) and the same in later 80's/90's rims.
2. if so how did it differ (what is the offset)
3. did these factory Subaru steel and sunnies differ in width. If so what widths
I gather there is a difference between the MY and L series but I am not sure about differences between the Brumbies over the years.
I am still considering something other than the factory Subaru alloys.
Posted: Fri Nov 06, 2015 10:20 pm
by Bantum
Sorry Cliff - missed your post, see the 'download' section ( link on fist page ) for a complete list of 4x140 PCD Wheels.
To your enquiries :
1 - Yes.
2 - Earlier ones had 35mm, later were 45mm offset.
3 - Factory standard 5", aftermarket ones vary from 5" to 6" in width.
Have fun trying to source them ...
Cheers, Bantum ...
Posted: Sat Nov 07, 2015 7:55 am
by Cliff R
Will stick an add in the wanted folder shortly.
Thanks for the info Bantum
Posted: Sun Nov 08, 2015 5:45 pm
by E.B.
Bantum wrote:Steptoe has found another :
Anybody know what it is ?
Cheers, Bantum ...
Are these for sale?
Mobile 0408585595 if they are
Posted: Mon Nov 09, 2015 4:55 pm
by Bantum
Dunno - Ask Steptoe ?
Cosmic ...
Posted: Sat Jan 23, 2016 11:37 pm
by Bantum
Found another that may work :
Cosmic Mk 2/3/4 ...
You may note the dimension sizes on table don't show pcd ....
From Gum Tree :
I think the ones shown on Gumtree are redrilled ... ( could be wrong )
Cheers, Bantum ...
Posted: Fri Feb 10, 2017 5:47 pm
by TOONGA
Those rims on the red L series are Peugeot rims I had a set not redrilled.
TOONGA
Update ...
Posted: Mon Nov 27, 2017 4:26 am
by Bantum
Sorry it's been a while since I posted anything on this, am now working on a new page to update with all the wheels I've found :
Subaru 4x140 PCD Wheels
When done I'll also update the Index on here ...
Ciao, Bantum ...
Re: List of 4x140 PCD Wheels ...
Posted: Thu May 06, 2021 2:15 am
by Bantum
Did an update recently to the Guide & have posted up some more new wheels found on it here :
Wheel Reference Guide V4
Sorry haven't done anything on here recently.
Ciao, Bantum ...
Re: List of 4x140 PCD Wheels ...
Posted: Sun Jan 30, 2022 5:57 pm
by BrisBrumby
Hi there i cannot seem to access any of the links - all say something of the order 'page cannot be found'. What am i doing wrong?!