The AUSubaru.com.au Forums

Looking at a set of (4) second hand rims 14" x 4 stud pattern.
Appear to be Speedies or Sunnies off a 1990 Brumby.
Are ALL Brumbies and MY's 4 x 140 PCD stud pattern or could there be differences ?
Would be buying them sight unseen.
This is of course pending any mods that might have been carried out on a car which may change the above.

Unless the hubs have been re-drilled to a different size, then they will be 4 x140 PCD.

TOONGA

Same goes for the L series too

Cheers

Bennie

My 2c...

Mine came with both 4x140 and 4x114.3 - the latter being drilled out by the previous owner. I haven't seen any others in person with the 4x114.3 modification. Most are usually converted to 5 stud or 6 stud patterns.

The 4x140 is standard. Good in my books because it stops people stealing your tyres, since near no one else needs such a rare pattern!

Thanks everyone.
I will have a think and see how I go