Page 1 of 1

More wheel id'ing needed

Posted: Mon Jun 14, 2010 9:27 pm
by Bogged!
What wheels are these? I got them from a local scrapyard for the scrap value so not much lost if they don't work out, they are obviously Subaru and a '99 model but off what? I have looked and checked eBay, this forum as well as every other picture available but no go so far. There are similar wheels (nice 5 spoke ones) off Liberty RS's, Rx's Impreza etc. as well as similar but nothing so far to id these 16x7's. They have the Subaru symbol cast on the back. Sandblasted and repainted either gold or black two pack they wouldn't be too bad would they or forget it and just buy a set of good ones?

[url="http://www.ausubaru.com.au/attachment.p ... 1276514599"[/URL][URL="http://www.ausubaru.com.au/attachment.p ... 1276514665"[/url]

Posted: Mon Jun 14, 2010 9:41 pm
by Gannon
Your attachments didnt work, you will have to try again

Posted: Mon Jun 14, 2010 10:06 pm
by Bogged!
Maybe this will work.

Posted: Mon Jun 14, 2010 10:45 pm
by guyph_01
those are off a wrx i think...

Posted: Tue Jun 15, 2010 7:15 am
by AlpineRaven
guyph_01 wrote:those are off a wrx i think...
Yes they are off from WRX...
Its painted black. Normally they would be silver.
Cheers
AP

Posted: Tue Jun 15, 2010 8:16 am
by steptoe
Looks rexy to me. Jolly decent of a wrecker to sell as scrap value rather than thinking maximum you may be prepared to pay plus a bit more

Posted: Tue Jun 15, 2010 8:26 am
by Venom
Exactly the same as what i bought to put on my Liberty. 2000 - 2001 impreza wheels, not sure but i think there is an STi version that came in gold but otherwise the same.

I use this page for identifying subaru wheels
http://www.subaruforester.org/vbulletin ... ter-19106/

Posted: Tue Jun 15, 2010 9:30 am
by spike
i would have said rx limited edition, like off my mates 95
but yeah his are gold/silve cant quite remember

one thing ive heard of doing is painting MAGS black and putting themon trailers.
wheels make up a hell of a lot of weight on a small trailer

Posted: Tue Jun 15, 2010 9:31 am
by spike
Venom wrote: I use this page for identifying subaru wheels
http://www.subaruforester.org/vbulletin ... ter-19106/
rep for venom
brilliant site there

Posted: Tue Jun 15, 2010 10:20 am
by Alex
yep gc8 wrx, from abuot 98-2000. Came in gold for sti

alex

Posted: Tue Jun 15, 2010 11:41 am
by bobbyjimmy
99/00 WRX wheels.

Posted: Tue Jun 15, 2010 4:57 pm
by Bogged!
Good one, thanks a heap guys. It's excellent that all you guys know what they are as I only thought they might be WRX, can't seem to find any pictures of good nick ones anywhere. Thank you for the link to wheels, same as the ones fitted to the Forester in silver with four spots on it:D

my turn!!!

Posted: Thu Jun 17, 2010 9:23 am
by spike
ok from 4WD action website
sorry if the pic is crap
the guy states the wheels are: 15x7" chrome triton rims (for now)
but ive got no idea, triton as in brand? mitsubishi triton?? help us out??

Posted: Thu Jun 17, 2010 10:11 am
by brumbybear
hey Spike they might be early model mitsubishi triton wheels but they look like Pajero rims

Posted: Thu Jun 17, 2010 12:58 pm
by spike
ok yeah not sure on the bolt pattern

Posted: Thu Jun 17, 2010 1:29 pm
by *Raptor*
Hard to tell from the pic but possibly chrome versions of these Mitsubishi Pajero/Triton steel wheels currently listed on ebay. Bolt pattern will be 6x140mm.
http://cgi.ebay.com.au/Four-Pajero-whee ... 2c5505cf06

Image

Posted: Thu Jun 17, 2010 2:38 pm
by spike
yeah they look quite similar
whether the wheels have been plated or the hubs are custom

Posted: Mon Jun 21, 2010 12:46 pm
by dfoyl
From memory, Pajero rims are 16" for that era (late 80s/early 90s). Chrome is on the V6, white on the 4-cylinder. My dad had a 91 (last of the boxy shape before they went all plastic) and it was definitely white hubs on the 4-cylinder (gutless 2600 silent shaft - was ok in Sigma's, but pulling around a 2 tonne 4wd...)

Dean.