List of 4x140 PCD Wheels ...

Get the low down on your ride ...

Moderator: Junior Administrator

User avatar
steptoe
Master Member
Posts: 11576
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Sat Jul 25, 2015 9:54 am

Think these were by Aunger - Turbines 13 x 6 4.7kg

centre machined to take the metal centre caps by Subaru :)

Image

User avatar
Bantum
General Member
Posts: 1847
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Like ...

Post by Bantum » Sun Jul 26, 2015 9:25 pm

Do you know what the offset is for these Steptoe ?

Cheers, Bantum ...

User avatar
steptoe
Master Member
Posts: 11576
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Sun Jul 26, 2015 11:04 pm

well, they came on an L Series and were alright on MY too. I can measure up ....

User avatar
henpecked
Junior Member
Posts: 442
Joined: Fri Dec 05, 2008 7:20 pm
Location: South Oz

jellybeans not for sale

Post by henpecked » Mon Jul 27, 2015 5:15 pm

My mate approached the owner and neither the wheels not the car are for sale.
So thats that
henpecked wrote:Not mine, but they may be available if anyone wants me to approach the owner.


Image

Image


Image

Image

User avatar
steptoe
Master Member
Posts: 11576
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Mon Jul 27, 2015 5:34 pm

aren't they just screaming out for some Purple Polish and some TLC !!

User avatar
Cliff R
General Member
Posts: 1061
Joined: Sat Feb 07, 2009 11:07 am
Location: Muswellbrook/NSW

Post by Cliff R » Sat Sep 05, 2015 10:48 am

I really wish I wasn't so time poor, I might be able to keep up with things.
Last night was my first time near the forum for months.
Not sure if I missed this in this discussion but.
Focusing on factory steel rims and Subaru supplied (white) Sunnies (13" 4 x 140 stud)
1. is there a difference in offset between the early 80's Brumby rims (steel and sunnies) and the same in later 80's/90's rims.
2. if so how did it differ (what is the offset)
3. did these factory Subaru steel and sunnies differ in width. If so what widths
I gather there is a difference between the MY and L series but I am not sure about differences between the Brumbies over the years.
I am still considering something other than the factory Subaru alloys.

User avatar
Bantum
General Member
Posts: 1847
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Post by Bantum » Fri Nov 06, 2015 10:20 pm

Sorry Cliff - missed your post, see the 'download' section ( link on fist page ) for a complete list of 4x140 PCD Wheels.

To your enquiries :

1 - Yes.
2 - Earlier ones had 35mm, later were 45mm offset.
3 - Factory standard 5", aftermarket ones vary from 5" to 6" in width.

Have fun trying to source them ... :)

Cheers, Bantum ...

User avatar
Cliff R
General Member
Posts: 1061
Joined: Sat Feb 07, 2009 11:07 am
Location: Muswellbrook/NSW

Post by Cliff R » Sat Nov 07, 2015 7:55 am

Will stick an add in the wanted folder shortly.
Thanks for the info Bantum

User avatar
E.B.
Junior Member
Posts: 1
Joined: Fri Oct 19, 2007 7:12 pm
Location: Brisbane

Post by E.B. » Sun Nov 08, 2015 5:45 pm

Bantum wrote:Steptoe has found another :

Image

Anybody know what it is ?

Cheers, Bantum ...
Are these for sale?
Mobile 0408585595 if they are

User avatar
Bantum
General Member
Posts: 1847
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Post by Bantum » Mon Nov 09, 2015 4:55 pm

Dunno - Ask Steptoe ?

User avatar
Bantum
General Member
Posts: 1847
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Cosmic ...

Post by Bantum » Sat Jan 23, 2016 11:37 pm

Found another that may work :

Cosmic Mk 2/3/4 ...

Image

You may note the dimension sizes on table don't show pcd ....

From Gum Tree :

Image

I think the ones shown on Gumtree are redrilled ... ( could be wrong )

Cheers, Bantum ...

User avatar
TOONGA
Elder Member
Posts: 5313
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Post by TOONGA » Fri Feb 10, 2017 5:47 pm

Those rims on the red L series are Peugeot rims I had a set not redrilled.


TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
Bantum
General Member
Posts: 1847
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Update ...

Post by Bantum » Mon Nov 27, 2017 4:26 am

Sorry it's been a while since I posted anything on this, am now working on a new page to update with all the wheels I've found :

Subaru 4x140 PCD Wheels

When done I'll also update the Index on here ... :)

Ciao, Bantum ...

User avatar
Bantum
General Member
Posts: 1847
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:

Re: List of 4x140 PCD Wheels ...

Post by Bantum » Thu May 06, 2021 2:15 am

Did an update recently to the Guide & have posted up some more new wheels found on it here :

Wheel Reference Guide V4

Sorry haven't done anything on here recently.

Ciao, Bantum ...

Post Reply

Return to “Brakes, Wheels and Tyres”