- Junior Member
- Posts: 4
- Joined: Fri Aug 28, 2009 9:03 pm
- Location: northcliffe western australia
Does this component have a name and what is the seal ? Also who supplies replacement studs and their nuts and the strange little bolts that need a special tool to undo because an ordinary ringy wont fit and the hex is too munted by heat and rust to get a grip.
Looking forward to some pearls of wisdom so I can get Brumbus back together, cheers.
Note: Just click the green Download button only.
https://mega.nz/file/zDgQwa4D#8CD8g4EmC ... Udh_KPNNqk
https://mega.nz/file/rP400Q4I#j3mxIbWez ... lAzfX2MeAc
As for removing them I reckon you’ll have to soak with some Inox or some other penetrative stuff to help loosen the rust hole in there. The other two bolts are probably a torx bolt from memory. You might have to drill/cut the head off to remove the cast pieces, then do a stud removal of some sort to get the rest of the bolt out of the head.
And I always thought they just used an exhaust gasket in between the cast piece and the head. I really can’t be sure on that as like I said, I’ve never removed one...
All the best with it, let us know how you go with it!
- General Member
- Posts: 1870
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD