Page 1 of 1
engine mods to a 99 liberty..any ideas??
Posted: Mon Feb 11, 2008 9:18 pm
by newby
hey every1 getting myself a 99 liberty an i wanna no what i should do to it to give it some more power..what to start off with an general cost of the parts..
thanx
Posted: Tue Feb 12, 2008 6:16 pm
by AlpineRaven
Which model "1999 Lib" are ya talking abt? EJ20 or EJ25 or EZ30?
Cheers
AP
Posted: Wed Feb 13, 2008 10:13 am
by BrennyV
If your aiming for a large gain I wouldn’t bother on the stock donk. You would want to go for an engine conversion. Put a set of nice Works or Advan rims on her Coilovers or really low springs and some dark tint 
Posted: Sat Feb 16, 2008 10:03 pm
by newby
hey raven its a 99 rx liberty.. if u could giv me some good tips on how to do the engine it would b much appreciated.. thanx
Posted: Sat Feb 16, 2008 10:04 pm
by newby
hey brennyv what u sed sounds alright but how much wuld it cost to get an engine conversion??
Posted: Sat Feb 16, 2008 11:13 pm
by d_generate
You should be able to get a B4 Twin Turbo front cut for around the $3,500 mark then swap everything over, it's about the cheapest option you have for power upgrades on a Gen 3, waste of time trying to get too much out of an N/A.
Posted: Sun Feb 17, 2008 2:34 am
by newby
where do u suggest i start looking for the b4 front cut?
Posted: Sun Feb 17, 2008 2:37 am
by newby
oh an another question how much do u think it would cost to get it installed?
Posted: Sun Feb 17, 2008 5:46 pm
by d_generate
Depends on how much you can do yourself & which state you are in, Japanese Wholesale Supplies in WA, Ichiban over east are two that come to mind.
It's a pretty straight forward swap if you stick to the twin turbo set up, join RSLC or OZliberty for the best info.
Posted: Tue Feb 19, 2008 12:08 am
by newby
well im in wa.. sorry about lack of info. will set it up properly when i get some time on my hands.. names ben. thanx for all the help.. whats the place in wa called?