Page 1 of 1
Brakelines for Lifted 2" Brumby
Posted: Mon Dec 19, 2005 9:40 pm
by Matt
Does anyone know what brakelines you can use for the front of 2" lifted Brumby? The originals are just long enough however they need replacing so i thought i might get some longer ones? I got some PBR ones today but they are wrong
Thanks in advance
Matt
Posted: Mon Dec 19, 2005 9:57 pm
by xaymaca
Take your old ones into a brake place and get some braided lines made up (longer than the originals of course).
I'm not sure if Enzed of Pirtek will have brake fittings, but a brake place I went to for my RX7 were able to make some up.
Posted: Mon Dec 19, 2005 11:07 pm
by rsrlegacy
I have never fitted longer 1s yet in the 50 plus kit fits. Just need the right brackets.
Posted: Mon Dec 19, 2005 11:16 pm
by xaymaca
It's true, you do not need longer ones for fitting a 2" kit. However, he said they need replacing anyway so basically just cut out the fact that he just put a lift kit in, and he's asking where he can get replacement lines made up.
Posted: Tue Dec 20, 2005 7:49 pm
by Matt
rsrlegacy i agree with you, how ever as xaymaca said i need to replace them anyway. I ended getting some made at enzyed for like $90. Right length and right connectors, word of warning they are inverted flares on the female end.
Thanks
Matt