Page 1 of 1
32/36 Weber Adaptor Plate
Posted: Mon Jun 25, 2007 12:41 am
by Matt
Does anyone know the size of material needed for an 32/36 Weber Adaptor Plate? To suit the bigger intake mainfold on an EA81.
Thanks
Matt
Posted: Mon Jun 25, 2007 12:46 am
by 90brumby
is about 12-17mm but it would be easyer to just buy an adaptor plate
i modified the 1 i got for my car as it was to suit a gemmni but it was still hard wrk
Posted: Mon Jun 25, 2007 12:52 am
by 90brumby
heres a link than subarino gave me after i bought mine
http://www.redlineweber.com/html/applic ... SUBARU.htm
Posted: Mon Jun 25, 2007 10:45 am
by Lapsed
I have heard on here or on ultimate subaru that you can swap the intake manifold off a ea82 on to the ea81. not sure how true it is and if it helps you any.
chris
Posted: Mon Jun 25, 2007 11:27 am
by Matt
Ended up pricing one, they wanted $39.95 for it which about $10-15 dearer then i could make it for, so i am going that way.
Thanks everyone
Matt
Posted: Mon Jun 25, 2007 9:45 pm
by Point
who did you get it through?
Posted: Mon Jun 25, 2007 9:52 pm
by Matt
PM sent Point
EA82 intake
Posted: Wed Jun 27, 2007 7:56 pm
by dfoyl
>>have heard on here or on ultimate subaru that you can swap the intake manifold off a ea82 on to the ea81. not sure how true it is and if it helps you any
Yes, you can fit an EA82 intake manifold to an EA81 but there's neglible performance gain based on feedback - maybe 1-2 hp.
Posted: Wed Jun 27, 2007 9:11 pm
by Matt
Thanks Fellas, i thought they were very similar.