The AUSubaru.com.au Forums

For those that have put a lift kit into a liberty with water to air intercooler , what mods did you do too stop the intercooler hitting where the engine stay rod {or just above} goes.

Mike.

space the intercooler off its mounts so it sits above the body work your referring to.

you space the back of the cooler, and the fornt sits lower to line up with the inlet manifold.

seagull took a different approach to liningthe cooler up with the manifold:

http://users.alphadimensions.net/users/ ... s/seagull/

As far as i know all the lift kit bits off that car are floatinground perth somewhere, if they were in brisbane i would have bought them already. I suggest you chase them! the gearbox crossmember, and rear suspension mods are kickass