Page 1 of 1
camber issues
Posted: Sat Jun 03, 2006 11:28 am
by Dougz
3 inch lift in brumby, front wheels way out. Can the camber be altered?
Posted: Sat Jun 03, 2006 12:55 pm
by waggaclint
K-MAC do a kit part number 720416f
Posted: Sat Jun 03, 2006 1:36 pm
by Dougz
Thanks.
Posted: Sat Jun 03, 2006 5:10 pm
by Subaman
Who made the kit for it and who fitted it as there should be no probs with the camber because of the kit.
Cheers
Grant
Posted: Sat Jun 03, 2006 6:46 pm
by PeeJay
Did you put the strut extensions in backwards? That would do it.
Posted: Sat Jun 03, 2006 7:14 pm
by grytvikken
rob..... just wondering if the strut tops are in the wrong way around. they were taken off a car that drove very well and i can only think that i may have mistakenly marked them the wrong way around. if that is the case i can only apologise. dave
Posted: Sun Jun 04, 2006 3:46 pm
by Dougz
Cool, hopefully that is the problem.. Will try swapping them around..